메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
X. S. Fang (University of Science and Technology Beijing) J. P. Lin (University of Science and Technology Beijing) Y. F. Liang (University of Science and Technology Beijing) F. Ye (University of Science and Technology Beijing) L. Q. Zhang (University of Science and Technology Beijing) G. L. Chen (University of Science and Technology Beijing)
저널정보
한국자기학회 Journal of Magnetics Journal of Magnetics Vol.16 No.2
발행연도
2011.6
수록면
177 - 180 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
0.30 ㎜ thick and 90 ㎜ wide thin foils made of Fe-6.5wt.%Si alloy were successfully fabricated by traditional rolling. The as-rolled sheets had good shapes and shining metal luster. The effects of annealing temperature on the magnetic properties of the sheets were investigated. Excellent Dc properties (H<SUB>c</SUB>: 11.55 A/m, μ<SUB>m</SUB>: 23710, and B<SUB>s</SUB>: 1.439 T) were obtained at an annealing temperature of 1453 K for 1.5 h. At low frequencies (≤ 1 ㎑), heat treatment temperature has little effect on iron loss which remained at the level of 9.8 W/㎏. Annealing at 1273 K for 1.5 h is optimum for frequencies above 5 ㎑.

목차

1. Introduction
2. Experimental
3. Results and Discussion
4. Conclusions
Acknowledgements
References

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-428-000554339