지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.5
- 수록면
- 1,047 - 1,052 (6page)
이용수
초록· 키워드
오류제보하기
This paper presents a core loss evaluation of AC filter inductor used on PWM converters. In order to increase the power density of the converters, high-frequency switching techniques have been applied. However, because of the limitation of cooling capability, reduction of volume of the passive components, especially the magnetic components, are limited. In order to overcome the problems, it is necessary to evaluate the loss of the magnetic components. However, conventional iron loss evaluation method, such as Steinmetz equation, cannot possible to evaluate the core loss, because those cannot take the dc-bias magnetizing condition into account.
The authors have been proposed two kinds of iron loss evaluation method, the one is “a loss-map method” and the other is “an inductor loss analyzer (ILA)”. A distinctive feature of those methods is that one can know the iron loss during each switching period on the PWM inverters. Also, former one is suitable for accurate calculation of the core loss in designing process, and the later one is suitable for measuring the core loss on the practical system. By using those methods accurate design and evaluation of the iron loss can be made, and hence high power density design of the converters is realized.
In this paper, firstly, a loss-map method which enables to calculate the iron loss of the ac/dc inductor in each switching period of the PWM inverter is briefly described. In the next section, an accurate measuring method of the iron loss of the ac filter inductor operating in a real PWM inverter is described. And it is proved that calculated and measured results coincide well. In the final section, iron loss characteristics of the ac filter inductor with various operating conditions of PWM inverter are discussed.
The authors have been proposed two kinds of iron loss evaluation method, the one is “a loss-map method” and the other is “an inductor loss analyzer (ILA)”. A distinctive feature of those methods is that one can know the iron loss during each switching period on the PWM inverters. Also, former one is suitable for accurate calculation of the core loss in designing process, and the later one is suitable for measuring the core loss on the practical system. By using those methods accurate design and evaluation of the iron loss can be made, and hence high power density design of the converters is realized.
In this paper, firstly, a loss-map method which enables to calculate the iron loss of the ac/dc inductor in each switching period of the PWM inverter is briefly described. In the next section, an accurate measuring method of the iron loss of the ac filter inductor operating in a real PWM inverter is described. And it is proved that calculated and measured results coincide well. In the final section, iron loss characteristics of the ac filter inductor with various operating conditions of PWM inverter are discussed.
목차
Abstract
Ⅰ. INTRODUCTION
Ⅱ. A LOSS MAP METHOD
Ⅲ. INDUCTOR LOSS IN A PWMINVERTER
Ⅳ. AN IRON LOSS ANALYZER (ILA)
Ⅴ. IRON LOSS OF THE AC FILTER INDUCTOR
Ⅵ. CONCLUSIONS
REFERENCES
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
Inductor Design Minimizing Power Loss for Boost Converter
Dong Liang
,
Eun-Sung Seo
,
Hwi-Beom Shin
전력전자학회 학술대회 논문집
2016
.07
Study on an accurate iron loss calculation method considering the non-uniformity of the magnetic flux density
Hi
,
oaki. Sato
,
Toshihisa. Shimizu
ICPE(ISPE)논문집
2015
.06
A Novel Dual-Input Boost-Buck Converter with Coupled Inductors for Distributed Thermoelectric Generation Systems
Junjun Zhang
,
Hongfei Wu
,
Kai Sun
외 2명
JOURNAL OF POWER ELECTRONICS
2015
.07
비상발전기 보호용 원판형 지락과전류계전기의 고조파영향에 관한 연구
김경철
,
고훈
조명·전기설비학회논문지
2015
.06
Experimental and Numerical Analysis of a Simple Core Loss Calculation for AC Filter Inductor in PWM DC-AC Inverters
Kyoung-Jun Lee
,
Honnyong Cha
,
Jong-Pil Lee
외 2명
JOURNAL OF POWER ELECTRONICS
2013
.01
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-560-000300125