메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김수천 (부경대학교) 조덕호 (부경대학교) 강창룡 (부경대학교)
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2008年度 秋季學術大會 論文集
발행연도
2008.11
수록면
118 - 128 (11page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
This study was carried out to investigate the influence of volume fraction of austenite phase, precipitation behavior and volume fraction of o phase, N addition on the volume fraction of austenite phase, o phase and mechanical properties in 25Cr-7Ni-4Mo-2W super duplex stainless steel.
The results obtained from this study are as follows:
With increasing the annealing temperature, the volume fraction of austenite increased and volume fraction of ferrite decreased, and volume fraction of austenite increased by N addition. Tensile strength decreased and elongation increased due to increasing the volume fraction of austenite by increasing annealing temperature. In the case of N addition specimens, tensile strength and elongation showed high value.
The precipitation of o phase was precipitated at ferrite phase and interface of ferrite and austenite, and the more precipitation of o phase was stimulated by N addition. With increasing of volume fraction of precipitated o phase, tensile strength was increased, elongation and impact value decreased. In case of o phase precipitated, N addition specimen showed high value of tensile strength, elongation, hardness and impact value than no addition specimen, and impact value rapidly decreased by precipitated R phase in early stage of aging.

목차

Abstract
1. 서론
2. 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-550-000668011