메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
서임술 (부경대학교) 박상현 (부경대학교) 문희준 (부경대학교) 박승원 (부경대학교) 안석환 (부경대학교) 남기우 (부경대학교)
저널정보
한국동력기계공학회 한국동력기계공학회 학술대회 논문집 2008年度 秋季學術大會 論文集
발행연도
2008.11
수록면
261 - 266 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study analyzed the crack-healing behavior of Si<sub>3</sub>N<sub>4</sub> composite ceramics based on variations in heat-treatment temperature. All semi-elliptical cracks of about 100 ㎛ were obtained from Vickers indenter using a load of 24.5 N. The results showed thai the coating of SiO<sub>2</sub> colloidal on cracks could significantly increase the bending strength. Meanwhile, the heat-treatment temperature has a profound influence on the extent of crack healing and the degree of strength recovery. The bending strength of the cracked specimen not coated with the SiO<sub>2</sub> colloidal recovered to the same extent as the smooth specimen at the optimum healing temperature of 1,273 K. However, the bending strength of the cracked specimen to which the SiO<sub>2</sub> colloidal was coated increased by up to 140 %. The crack healed specimen coated with the SiO<sub>2</sub> colloidal showed high-heat resistance up to 1273 K, its bending strength increased by up to 137 % greater than that of the smooth specimen.

목차

Abstract
1. 서론
2. 재료 및 실험방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-550-000668233