메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
리야드 (경상대학교) 김영식 (경상대학교) 이대철 (경상대학교) 정한식 (경상대학교) 정효민 (경상대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2011년도 하계학술발표대회
발행연도
2011.7
수록면
603 - 606 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
The article focuses on pressure characteristics inside single loop oscillating heat pipe (OHP) that is of 4.5 ㎜ inner diameter copper tube with the length of 440 ㎜. The system consists of evaporator, condenser and adiabatic section at middle of heat pipe. Distilled water is used as working fluid inside the OHP with different filling ratios of 40%, 60%, 80% of total volume. Experimental results shows that thermal characteristics are significantly inter-related with pressure fluctuations as well as pressure frequency. And the pressure frequency also depends upon the evaporator temperature which has been maintained from 60oC to 96oC. The Investigation shows 60% filling ratio gives the highest magnitude of inside pressure and highest pressure frequency at any of setting evaporator temperature. Piezoresistive absolute pressure sensor (Model-Kistler 4045A5) has been used to take data.

목차

ABSTRACT
1. Introduction
2. Experimental Setup
3. Data Analysis
4. Result and Discussion
5. Conclusion
Acknowledgment
Reference

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-553-000707616