지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.11
- 수록면
- 278 - 281 (4page)
이용수
초록· 키워드
오류제보하기
This system can predict the maximum output about all illumination levels so that the PV system designer can design the system having the best efficiency. For the output prediction exact about the solar cell, that is the device the basis most in the PV system,the basis has to be in order to try this way.
The solution based on Lambert W-function are presented to express the transcendental current-voltage characteristic containing parasitic power consuming parameters like series and shunt resistances. A simple and efficient method for the extraction of a single current-voltage (I-V) curve under the constant illumination level is proposed. With the help of the Lambert W function, the explicit analytic expression for I is obtained. And the explicit analytic expression for V is obtained. This analytic expression is directly used to fit the experimental data andextract the device parameters.
The I-Vcurve of the solar cell was expressed through the modeling using Lambert W-function and the numerical formula where there is the difficulty could be logarithmically expressed This method expresses with theI-V curve through the modeling using Lambert W-function which adds other loss ingredients to the equation2 as to the research afterward. And the solar cell goes as small and this I-V curve can predict the power penalty in the system unit.
The solution based on Lambert W-function are presented to express the transcendental current-voltage characteristic containing parasitic power consuming parameters like series and shunt resistances. A simple and efficient method for the extraction of a single current-voltage (I-V) curve under the constant illumination level is proposed. With the help of the Lambert W function, the explicit analytic expression for I is obtained. And the explicit analytic expression for V is obtained. This analytic expression is directly used to fit the experimental data andextract the device parameters.
The I-Vcurve of the solar cell was expressed through the modeling using Lambert W-function and the numerical formula where there is the difficulty could be logarithmically expressed This method expresses with theI-V curve through the modeling using Lambert W-function which adds other loss ingredients to the equation2 as to the research afterward. And the solar cell goes as small and this I-V curve can predict the power penalty in the system unit.
목차
Abstract
기호설명
1. 서론
2. 이론
3. 수학적 모델링
4. 결론
후기
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
가상구현 태양전지 시스템을 위한 태양전지의 새로운 모델링
최규하
,
정병환
,
강병희
외 1명
전력전자학회논문지
2006
.02
태양복사모델을 이용한 태양전지판의 최적 경사각에 대한 연구
지준범
,
최영진
,
이규태
한국태양에너지학회 논문집
2012
.04
NOCT Test Results for PV modules
Kyung-Soo Kim
,
Seok-Ki Kim
한국신·재생에너지학회 학술대회 초록집
2015
.06
Modeling of the power characteristic for crystalline silicon solar cell in Matlab
Jongguk Bae
,
Gihwan Kang
,
Kyungsoo Kim
한국신·재생에너지학회 학술대회 초록집
2013
.05
CIGS 태양전지 모듈을 이용한 리모델링 건물의 ZEB(Zero energy building) 달성 및 평가에 관한 연구
이상길
,
김경수
,
강기환
한국신·재생에너지학회 학술대회 초록집
2013
.05
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2013-563-001383027