지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Recently, the laser processing method has used as micro-machining technologies in industries of aerospace, electronics and automotive. The laser processing newly focused could be alternative to existing machining method. However, there are few practical results of research about the proper setting of the laser machining conditions and the laser machining characteristics for mechanical materials. The purposes of this study was to choose optimum machining conditions and to estimate the laser machining characteristics using taguchi experimental method for various mechanical materials that is S45C, Stainless steel, Aluminum, Copper, Titanium and Tungsten carbide. From obtained results, it was confirmed that optimum machining conditions could be found and laser machinability depends on thermal conductivity and hardness of workpiece.
목차
ABSTRACT
1. 서론
2. 실험 장치 및 실험방법
3. 다구찌 실험 계획법의 적용
4. 재료별 최적 가공 조건의 결정
5. 결론
후기
참고문헌
참고문헌 (7)
참고문헌 신청
1. [학술지(정기간행물)] - Chen-Hao Lia / 2007 / Study of optimal laser parameters for cutting QFN packages by Taguchi’s matrix method / Optics & Laser Technology 39 : 786 ~ 795
2. [학술지(정기간행물)] - Avanish Kumar Dubey / 2008 / Multi-objective optimization of Nd-YAG laser cutting of nickel-based super alloy sheet using orthogonal array with principal component analysis / Optics and Lasers in Engineering 46 : 124 ~ 132
4. [학술지(정기간행물)] - Lim, P / 2006 / Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments / J.of KSME 8 (4) : 59 ~ 64
5. [학술대회논문] - Song, C. S / 2003 / Selection of Optimum Machining Condition of Dry Turning using Taguchi Method / transactions of the korean society of machine tool engineers Fall Conf : 19 ~ 24
6. [학술대회논문] - Son, J. M. / 2003 / Optimization of Nano-machining parameters using Acoustic Emission and Taguchi Method / transactions of the korean society of machine tool engineers Spring Conf : 50 ~ 55
2. [학술지(정기간행물)] - Avanish Kumar Dubey / 2008 / Multi-objective optimization of Nd-YAG laser cutting of nickel-based super alloy sheet using orthogonal array with principal component analysis / Optics and Lasers in Engineering 46 : 124 ~ 132
4. [학술지(정기간행물)] - Lim, P / 2006 / Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiments / J.of KSME 8 (4) : 59 ~ 64
5. [학술대회논문] - Song, C. S / 2003 / Selection of Optimum Machining Condition of Dry Turning using Taguchi Method / transactions of the korean society of machine tool engineers Fall Conf : 19 ~ 24
6. [학술대회논문] - Son, J. M. / 2003 / Optimization of Nano-machining parameters using Acoustic Emission and Taguchi Method / transactions of the korean society of machine tool engineers Spring Conf : 50 ~ 55
이 논문의 저자 정보
이 논문과 함께 이용한 논문
교호작용을 고려한 이산설계 공간에서의 Steering System 설계
권우성
,
박광서
,
김영호
외 1명
한국소음진동공학회 학술대회논문집
2006
.05
다구찌 방법의 강점 및 약점에 대한 사례 연구
권혁무
,
장현애
한국경영과학회 학술대회논문집
2013
.05
진동소음 성능 개발
서진관
,
조영훈
오토저널
2015
.03
자동차 Power Seat 용 DC Motor의 소음 진동 자동 평가에 대한 연구
한현석
,
정의봉
,
김건혁
외 1명
한국소음진동공학회 학술대회논문집
2002
.05
대형 광학계 연마 장비에 의한 대구경 반사경의 최적 근사 구면 제조 방법에 관한 연구
송창규
,
김경호
,
황주호
외 3명
Journal of the Korean Society for Precision Engineering
2013
.03
최근 본 자료
댓글(0)
0