메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
이상훈 (한국과학기술연구원) 유호선 (숭실대학교) 임효묵 (에스이테크) 이윤표 (한국과학기술연구원)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2012년도 하계학술발표대회
발행연도
2012.6
수록면
466 - 469 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The propylene glycol solution flowing through the pipe in the horizontal ice slurry maker, with the fall down temperature because of the evaporation of the refrigerant existing outside the horizontal pipe, is transformed into ice slurry. At this time, the screw located within the horizontal pipe keeps on rotating, pushing the formed ice slurry out. If the screw stops functioning on account of a motor failure etc., the already-formed ice slurry is stuck within the pipe and can become more solid ice. In order to check whether, in this kind of situation, the already-formed ice slurry is likely to damage the pipe, this study carried out the measurement of the pressure rise. With one side of the ice slurry maker pipe, within the pipe the screw was stopped, closed with a valve and the other side left open, when the temperature gradually dropped and freezing occurred inside the slurry maker, the resulting volume expansion and the pressure at the closed part were measured. The extent of measured pressure rise and the allowable pressure of the adopted pipe were compared and the possibility of damage by freezing was investigated.

목차

ABSTRACT
1. 서론
2. 실험장치 및 실험방법
3. 실험결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2013-553-002609844