메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박대일 (조선대학교) 김태규 (조선대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2011년도 추계학술대회 강연 및 논문 초록집
발행연도
2011.11
수록면
2,355 - 2,359 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Design and thermal-fluidic analysis of CH<SUB>4</SUB> SCR reactor for GTL-FPSO is presented in this paper. The temperature distribution through the SCR reactor should be uniform in order to optimize the catalytic reforming reaction. The numerical analysis of heat, flow and catalytic reactions was used to design the SCR reactor. The kinetic constants for catalytic analysis were calculated from Arrhenius plot that was obtained by SCR experiments on Ni/Al<SUB>2</SUB>O<SUB>3</SUB> catalysts. The catalysts were prepared by impregnating Ni into commercial Al<SUB>2</SUB>O<SUB>3</SUB> pellets. The reaction temperatures ranged from 1023 K to 1173 K. The CH<SUB>4</SUB> and CO<SUB>2</SUB> conversions increased with the temperature, while H<SUB>2</SUB>/CO ratio of syngas decreased with the increase of temperature. The commercial FLUENT code was used to predict the temperature distribution in the SCR reactor. It was shown that the performance of SCR reactor depends strongly on the temperature distribution through the catalysts

목차

Abstract
1. 서론
2. 실험
3. 결과 및 토의
4. 결론
후기
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-000803407