메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
민태범 (한양대학교) 조인성 (케미콘) 이한승 (한양대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第28 第12號
발행연도
2012.12
수록면
61 - 68 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
The purpose of this study is to develop the precast concrete without steam curing. Generally, it is necessary that the precast concrete must cure in steam condition. If we make a precast concrete without steam curing, we could save the manufacturing energy and CO₂ emission. In this experiment, the high early strength cement containing massive C₃S quantity was used to enhance the early strength of cement mortar using admixtures which can accelerate C₃S hydration reaction in the condition of room temperature. The measuring items are zero flow, setting times, compressive strength and analysis of MIP & SEM.
From the results of this experiment, hardening catalyst is very effective to increase the high early strength of cement mortar according to the early formation of C-S-H hydrate. The compressive strength of mortar is increased that it increases in the amount of consumption of hardening catalyst. The increasing cause of the compressive strength of mortar is decrease in a pore ratio and pore size of mortar due to the acceleration of C₃S hydration with hardening catalyst. Also, the generation of C-S-H was confirmed by use of a hardening catalyst according to an SEM analysis. When the strength and workability of mortar are considered, the appropriate amount of hardening catalyst dosage is about 1.0%.

목차

Abstract
1. 서론
2. 기존문헌 분석 및 고찰
3. 실험개요 및 방법
4. 실험결과 및 고찰
5. 결론
참고문헌

참고문헌 (4)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-540-000601254