지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2009.6
- 수록면
- 224 - 229 (6page)
이용수
초록· 키워드
오류제보하기
The controllable pre-tilt angle of liquid crystals was investigated using a blend of horizontal and vertical polyimide prepared by a rubbing method, Various pretilt angles in the range from 0° to 90° were achieved as a function of the vertical polyimide content. We observed uniform liquid crystal alignment on the rubbing-trcated blended polyimide layer, A no-bias-bend (NBB) pi cell with an intermediate pretilt angle of 47,8° was manufactured. This cell had no initial bias voltage and a low threshold voltage, which indicates that it has low power consumption, In addition, the response time of the NBB pi cell was rapid.
목차
Abstract
Introduction
Experiment
Results : Pretilt angle
Results : LC aligning capability
Results : Anchoring energy
Results : V-T curve
Conclusion
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Controllable Pretilt Angles for Liquid Crystal Molecules using a Rubbing Treated Mixture Layer
Transactions on Electrical and Electronic Materials
2009 .01
-
No bias bend cell using a dual alignment layer with an intermediate pretilt angle
한국고분자학회 학술대회 연구논문 초록집
2008 .04
-
Control of liquid crystal pretilt angle using polyimide mixture
한국정보디스플레이학회 International Meeting
2008 .01
-
Dependence of LC Pretilt Angle on the Structure of Polyimide Alignment Layer
한국고분자학회 학술대회 연구논문 초록집
2000 .04
-
The effect of pretilt angle on viewing angle in In-Plane switching mode LCD
한국정보디스플레이학회 International Meeting
2003 .01
-
Annealing Behavior of Pretilt Angles on Polyimide Surface with Rubbing and Ion Beam Irradiation
Transactions on Electrical and Electronic Materials
2008 .01
-
Liquid Crystal Orientation Properties on Homogeneous Polymer Surface by Various Alignment Methods
Transactions on Electrical and Electronic Materials
2009 .01
-
Washing Effects on Generation of Pretilt Angle In NLC, 5CB, on a Polymide surface with Trifluoromethyl Moieties
Transactions on Electrical and Electronic Materials
2003 .01
-
Liquid Crystal Alignment Effect on the Polymer Surface using Thin Plastic Substrate
한국정보디스플레이학회 International Meeting
2004 .01
-
Enhancement of pretilt angle using blending polyimide
한국정보디스플레이학회 International Meeting
2008 .01
-
액정배향막 표면 개질에 따른 전기광학적 특성연구
대한전자공학회 학술대회
2008 .06
-
Continuous Pretilt Control Using Heterogeneous Polyimide Mixture
한국정보디스플레이학회 International Meeting
2008 .01
-
LIQUID-CRYSTAL ALIGNMENT ON RUBBED POLYIMIDE FILMS WITH VARIOUS SIDE CHAINS
한국재료학회 학술발표대회
1998 .01
-
Enhancement of Electro-optic Properties of Automatic Multi-domain Vertical Alignment of Liquid Crystal with Pretilt Angles
한국고분자학회 학술대회 연구논문 초록집
2019 .04
-
Effect of Chemical structure of rubbed polyimide films on Liquid crystal alignment
한국고분자학회 학술대회 연구논문 초록집
1997 .04
-
Statistical Modeling of Pretilt Angle Control on theHomogeneous Polyimide Surface as a Function ofRubbing Strength and Baking Temperature
Transactions on Electrical and Electronic Materials
2006 .01
-
폴리이미드-액정 계면의 특성에 따른 액정 배향의 특성 및 안정성
폴리머
2003 .09
-
러빙처리된 플렉시블 액정표시소자의 전기광학특성
전기전자재료학회논문지
2004 .01
-
Pretilt of and Orientation of Liquid-Crystals on the Surface of Polymer Films : Effects of UV-Exposure, Rubbing, and Annealing
한국고분자학회 학술대회 연구논문 초록집
1999 .10
-
Liquid crystal alignment on the inkjet printed polyimide by using new alignment method
한국정보디스플레이학회 International Meeting
2007 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-567-000274945