메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김상현 (부산대학교) 권용남 (한국기계연구원)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2011년도 한국소성가공학회 춘계학술대회 논문집
발행연도
2011.5
수록면
180 - 183 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
Fine grained materials have been known to show superplastic elongation at elevated temperature. Fine grained superplastic A1 alloys usually bring more than several hundred percent elongation at optimum conditions. Cavitation along grain boundaries has been known to be the most important mechanism to lead a fracture in superplastic A1 alloys when grain boundary sliding is main deformation mechanism. Recently, Mg alloys have drawn a lot of attention due to their lightness. Since Mg alloy have the worst formability among metallic engineering materials, superplastic blowing at the elevated temperature would be one of option to avoid poor formability, however, Mg alloy such as AZ31 sheet just showed much lower elongation compared with A1 alloys with similar grain size.
In the present study, cavitation behavior is investigated to understand a difference in fine-grained A1 and Mg alloy in terms of deformation and microstructure evolution during high temperature deformation. Generally, particles sitting along rolling direction would be the preferable sites for cavity opening in microstructure observation. However, back pressure did not influence the overall blow forming characteristics in AZ31 system as much as in superplastic A1 alloys. This tendency might be originated from a limited accommodation system for grain boundary sliding of AZ31

목차

Abstract
1. 서론
2. 실험 방법 및 결과
3. 요약
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-551-000203948