메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
안대균 (동아대학교) 노윤철 (동아대학교) 한승호 (동아대학교) 최다운 (동아대학교) 조윤현 (동아대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2012년도 추계학술대회 논문집
발행연도
2012.11
수록면
1,993 - 1,996 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Wind power energy is one of the attractive renewable energies. Comparing to on-shore wind turbine, the off-shore wind turbine has advantages such as higher energy density and fewer constraint conditions. However, due to a high initial investment, the unit cost of power production should be reduced by using a large-scaled wind turbine with capacity of more than 5㎿. The geared-type wind turbine needs a relative high maintenance cost of power train system, so that the industries begin to pay attention to the large-scaled gearless-type wind turbine. In this paper, a case study to design the rotor of the AFPM(Axial Flux Permanent Magnet)-type generator applied to the gearless type wind turbine was performed. Under a design constraint of deformation, i.e. smaller than 3㎜ at the end of rotor, the design parameters such as thickness of spider and width of rib in the rotor were determined, in which the total weight of the rotor was below down 19tonf.

목차

Abstract
1. 서론
2. 전자기-구조 연성해석
3. 회전자의 구조설계
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-000191179