메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김민철 (경상대학교) 엄재근 (경상대) 박건형 (센트랄) 강신길 (센트랄모텍) 정순종 (센트랄모텍) 전만수 (경상대학교)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2010년도 한국소성가공학회 춘계학술대회 논문집
발행연도
2010.5
수록면
387 - 390 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
In this paper, a useful two-dimensional finite element approach is applied to structural analysis of dies in hot lateral forging of long parts. Three-dimensional forging simulation and die structural analysis are conducted for an aluminum hot forging process of the front lower control arm of an automobile and their results are criticized in terms of application for improving designs of process or die. Two dimensional approach for engineering design is proposed especially for prediction of stress concentration with higher accuracy when the material is long compared to its diameter and it is applied to the process to solve the local problem. It is shown that the predictions of two dimensional approach is very close to those of three-dimensional approach if the velocity Component normal to the plane selected for two dimensional analysis is negligible.

목차

Abstract
1. 서론
2. 프론트로어컨트롤암 단조공정과 금형구조의 삼차원 유한요소해석
3. 2차원 접근방법
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-550-002335820