지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국마린엔지니어링학회 Journal of Advanced Marine Engineering and Technology (JAMET) 한국마린엔지니어링학회지 제37권 제2호
- 발행연도
- 2013.3
- 수록면
- 163 - 169 (7page)
이용수
초록· 키워드
오류제보하기
In order to make the vertical-axis cross flow wind turbine commercially feasible, a guide vane is adopted and the effect of the guide vane shape is examined in order to improve the wind turbine performance. CFD analysis on the performance and internal flow of the turbine is carried out for the wind turbine model. The result shows that when the guide nozzle is installed, almost over two times of power coefficient are achieved in comparison with the case of no guide nozzle installation. The guide nozzle acts as a role of suppressing the flow resistance at the blade passage, which is found when the guide nozzle is installed. Moreover, in this study, two kinds of the guide vane with a straight type and a curved type are adopted and compared. The curved guide vane nozzle produces higher power coefficient in comparison with that of straight guide vane nozzle.
목차
Abstract
1. Introduction
2. Cross Flow Wind Turbine Models and Numerical Methods
3. Results and Discussion
4. Conclusion
References
참고문헌 (7)
참고문헌 신청
B. Sorensen / 2007 / Renewable Energy Conversion, Transmission and Storage / Elsevier
K. Seki / 2008 / Vertical Axis Wind Turbine / Power Company Limited
J. Fukutomi / 2011 / Study on performance and flow condition of a cross-flow wind turbine with a symmetrical casing / Journal of Fluids Engineering 133
T. Shigemitsu / 2009 / Study on performance improvement of cross-flow wind turbine with symmetrical casing / Journal of Environment and Engineering 4(3):490~501
M. Goto / 2001 / Experimental study on vertical axis wind turbine for inhabited region / Proceedings of Japan Society of Mechanical Engineers Fluid Engineering Division Conference 1304
K. Seki / 2008 / Vertical Axis Wind Turbine / Power Company Limited
J. Fukutomi / 2011 / Study on performance and flow condition of a cross-flow wind turbine with a symmetrical casing / Journal of Fluids Engineering 133
T. Shigemitsu / 2009 / Study on performance improvement of cross-flow wind turbine with symmetrical casing / Journal of Environment and Engineering 4(3):490~501
M. Goto / 2001 / Experimental study on vertical axis wind turbine for inhabited region / Proceedings of Japan Society of Mechanical Engineers Fluid Engineering Division Conference 1304
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-003123737