지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2013.6
- 수록면
- 394 - 401 (8page)
이용수
초록· 키워드
오류제보하기
A new Rockwell hardness (HRC) model using a volumetric parameter by a least square and fractal interpolation method is suggested. The results are also investigated in comparison to real measured hardness data. For this purpose, the measurement of an indented volume is performed using a confocal laser scanning microscope (CLSM), and the captured height encoded image (HEI) is used as an original surface for the calculation of the indented volume. After configuring the surface, the constructed volume is calculated and used as an independent variable for HRC hardness modeling. The hardness model is established using an experimental modeling technique involving a least square algorithm and fractal interpolating model, and this suggested model can be used to reliably predict the Rockwell hardness. These techniques can also be applied to the modeling of the Brinnell and Vickers hardnesses using a volumetric variable.
목차
ABSTRACT
1. Introduction
2. Data acquisition and analysis
3. Discussion of HRC model
4. Conclusions
References
참고문헌 (18)
참고문헌 신청
2. [학술대회논문] - Cha, S. I. / 2002 / Model on the hardness of nanocrystalline WC/Co cemented carbides / Proceeding of the KPMIC, Spring conference : 37 ~
6. [학술지(정기간행물)] - Yang, J. Y. / 2011 / Machined surface generation using wavelet filtering / J. of MST 25 (3) : 639 ~ 645
7. [학술지(정기간행물)] - Yuan, C. / 2005 / Surface Characterization using wavelet theory and confocal laser scanning microscopy / Trans. of the ASME 127 : 394 ~ 404
8. [단행본] - Corle, T. / 1996 / Confocal Scanning Optical Microscopy and Related Imaging Systems / Academic Press
9. [학술지(정기간행물)] - Lee, H. W. / 2010 / Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe / J. of MST 28 (8) : 1637 ~ 1645
6. [학술지(정기간행물)] - Yang, J. Y. / 2011 / Machined surface generation using wavelet filtering / J. of MST 25 (3) : 639 ~ 645
7. [학술지(정기간행물)] - Yuan, C. / 2005 / Surface Characterization using wavelet theory and confocal laser scanning microscopy / Trans. of the ASME 127 : 394 ~ 404
8. [단행본] - Corle, T. / 1996 / Confocal Scanning Optical Microscopy and Related Imaging Systems / Academic Press
9. [학술지(정기간행물)] - Lee, H. W. / 2010 / Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe / J. of MST 28 (8) : 1637 ~ 1645
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-550-002509453