메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김성동 (금오공과대학교) 전세형 (이노템즈) 주별진 (금오공과대학교) 윤소남 (한국기계연구원)
저널정보
유공압건설기계학회 유공압건설기계학회 학술대회논문집 2013년도 춘계 학술대회 논문집
발행연도
2013.6
수록면
49 - 55 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Common type of servovalves is to control flowrate measuring and diagnosis of servovalve`s hysteresis is based upon analysis of flowrate signal. The ISO 10770-1 and KS B 6511 regulations for servovalve`s hysteresis are also established from analysis of flowrate signal. The measurement of flow is hard to implement. In this study, some hysteresis diagnosis methods are investigated to use pressure signal and spool displacement signal. Three kinds of hysteresis; flowrate hysteresis, pressure hysteresis and spool displacement hysteresis are measured from an experiment set-up. Two kinds of pressure hysteresis; pressure gain hysteresis and no-load pressure hysteresis are investigated. The spool displacement hysteresis is found to be the most accurate and pressure hysteresis are also good enough as well as flow hysteresis. The pressure gain hysteresis shows a little error from other hysteresis, and it is estimated because geometric dimension error of spool and sleeve affects the hysteresis.

목차

Abstract
1. 서론
2. 이론 배경
3. 히스테리시스 측정 시험
4. 히스테리시스 측정 결과
5. 결론
참고 문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-500-002497129