지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2013.6
- 수록면
- 138 - 144 (7page)
이용수
이 논문의 연구 히스토리 (2)
2013
Component Cleanliness of Fluid Systems in Automotive and Hydraulics complying with ISO Standards
J. H. Hong
,
Mike Day
유공압건설기계학회 학술대회논문집
2013.06
학술대회자료
Component Cleanliness of Fluid Systems in Automotive, Lubricant and Hydraulics complying with ISO Standards
J. H. Hong
,
Mike Day
한국트라이볼로지학회 학술대회
2013.04
학술대회자료
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
As the presence of particulate contamination in the lubricant is a major cause of failures and short component service life in fluid systems, companies in a variety of industries are focusing attention in achieving and maintaining system cleanliness. The presence of machining and assembly debris in the fluid system at startup and during the initial running phase will cause a substantial increase in the wear rates of the system, further generation of large particles, with the consequential loss in performance and component life. It will also increase the probability of sudden and catastrophic failure of the system. To achieve clean components requires appropriate manufacturing, cleaning and measurement processes. Accurate assessment of the effectiveness of components and parts cleanliness is related to given contaminant extraction methods, analysis and data reporting, and ISO Standards are continually being developed to control procedures and implement a consistent cleanliness evaluation process.
This paper explains the processes in these standards and explains how similar procedures have been adapted to suit the requirements of the above Industries. It also gives guidance and recommendations on the implementation of these standards, so that the best use can be made of them.
This paper explains the processes in these standards and explains how similar procedures have been adapted to suit the requirements of the above Industries. It also gives guidance and recommendations on the implementation of these standards, so that the best use can be made of them.
목차
Abstract
1.Introduction
2. Contaminant Extraction Methods
3. Extractions for Cylindrical Pipe type of Hydraulic, Lube and Fuel Components
4. Protocol and Validation for Contaminant Extraction
5. Relating the Cleanliness of a Hydraulic System and the Components
6. Analysis Methods
7. Data presentation and Reporting
8. Conclusions and Recommendations
9. Reference
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2014-500-002497285