메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
신현오 (고려대학교) 이승훈 (삼성물산) 이우진 (삼성물산) 윤영수 (고려대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第29卷 第10號
발행연도
2013.10
수록면
59 - 66 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Increasing need for ultra-high-strength concrete as a primary structural material in high-rise building construction has underlined mechanical properties of ultra-high-strength concrete as one of the key consideration in design. Unfortunately, current code provisions are the results of tests done on normal strength concrete or high-strength concrete and these provisions may neither be adequate nor safe for structural member with ultra-high-strength concrete. Accordingly, regression analysis was carried out using experimental data from this study and data from the literature and prediction equations for mechanical properties such as compressive strength gain with time, splitting-tensile strength, flexural strength, modulus of elasticity, and poisson"s ratio were proposed. The reliability of the proposed equations were assessed by R2 value and the proposed equations have been found to give a good representation of the actual mechanical properties of concrete. The validity of equations recommended by KCI 2007 for estimating mechanical properties of concrete can be extended for high-strength and ultra-high-strength concrete with average compressive strengths ranging between 55 and 220MPa.

목차

Abstract
1. 서론
2. 실험결과 요약
3. 설계기준 예측식의 비교
4. 자료수집 및 분석
5. 예측식 제안
6. 결론
참고문헌

참고문헌 (7)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2014-500-002750721