메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
안대균 (동아대학교) 우은택 (동아대학교) 조윤현 (동아대학교) 한승호 (동아대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2013년도 학술대회
발행연도
2013.12
수록면
2,928 - 2,932 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (4)

초록· 키워드

오류제보하기
For the sustainable development of wind energy, the energy industries have invested in the development of highly efficient wind generator such as an axial flux permanent magnet(AFPM) generator. The AFPM generator, however, has a history of overheating on the stator surface, so that power production decreases significantly. A proper cooling system, therefore, is needed. Although in the case of low capacity generator, a convective-type cooling system has been developed, the size of the air blower must be increased when the generator’s capacity exceeds 2.5MW. In this study, a newly developed conductive-type cooling system was proposed for the 2.5MW AFPM generator installed on an offshore wind turbine. Through electromagnetic-thermal analysis, the characteristics of the heat transfer in the generator were investigated. For the application of the proposed cooling system, the temperatures on the surfaces of stator and permanent magnet were 86 and 68℃, respectively, which could not affect the decrease of the power production efficiency.(KETEP 20134030200320)

목차

Abstract
1. 서론
2. 대용량 AFPM 발전기 및 냉각장치
3. 전자기-열전달 연성해석
4. 해석 결과 및 고찰
5. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0