지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.6
- 수록면
- 107 - 114 (8page)
이용수
초록· 키워드
오류제보하기
This is a study that surveyed and analyzed the present status of producing loess construction materials in Korea from 2006 to 2011. The findings are as follows.
1) More than 70% of loess construction material manufacturers are distributed in the capital area. Chungcheong-do and Gyeonggi-do are grown by about 20% on the annual average.
2) Shape of loess brick is possessed mostly by a rectangular parallelepiped. A hole shape, which has 1~5 holes among these things, is possessing a majority.
3) It was indicated to be 42 days as material age for the compressive strength, to be about 2.7Mpa for both extrusion and compression, and to be about 30% for absorptance.
4) Among the whole loess material manufacturers, it accounts for 87 for loess brick 66% for loess mortar and more than 39% for loess paint, but within 10%∼15% for other loess products.
5) The main specifications of loess brick are 300×150×150, 300×150×100, 300×200×150, 300×150×200 in order of the output of 74kinds of loess bricks.
6) In order to improve the strength of building materials, mortar and concrete used loess, it is necessary to examine closely about the effect of ceramic binder and cement on loess products.
1) More than 70% of loess construction material manufacturers are distributed in the capital area. Chungcheong-do and Gyeonggi-do are grown by about 20% on the annual average.
2) Shape of loess brick is possessed mostly by a rectangular parallelepiped. A hole shape, which has 1~5 holes among these things, is possessing a majority.
3) It was indicated to be 42 days as material age for the compressive strength, to be about 2.7Mpa for both extrusion and compression, and to be about 30% for absorptance.
4) Among the whole loess material manufacturers, it accounts for 87 for loess brick 66% for loess mortar and more than 39% for loess paint, but within 10%∼15% for other loess products.
5) The main specifications of loess brick are 300×150×150, 300×150×100, 300×200×150, 300×150×200 in order of the output of 74kinds of loess bricks.
6) In order to improve the strength of building materials, mortar and concrete used loess, it is necessary to examine closely about the effect of ceramic binder and cement on loess products.
목차
Abstract
1. 서론
2. 황토 건자재 생산 현황조사
3. 결론
참고문헌
참고문헌 (8)
참고문헌 신청
이 논문의 저자 정보
이 논문과 함께 이용한 논문
친환경 황토 보드를 이용한 경량 칸막이 벽체의 세대간 경계벽 적용을 위한 내화 및 차음 성능 연구
조경숙
,
여인환
대한건축학회 논문집 - 구조계
2013
.12
황토주택의 거주선호도 조사연구 : 대구광역시 칠곡지역 거주자를 대상으로
박찬돈
,
신상화
주거환경
2013
.06
석회복합체와 흙을 이용한 흙벽체 재료 개발에 관한 기초적 연구
황혜주
,
강남이
KIEAE Journal
2010
.10
황토 콘크리트의 배합조건에 따른 강도성상 및 내구성
황혜주
,
노태학
,
김진일
KIEAE Journal
2008
.10
흙건축 공법의 시대적 관점에 따른 조적 및 미장시공 사례분석
이종국
,
김철
,
김태경
외 1명
KIEAE Journal
2008
.04
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-600-001268272