지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering 한국정밀공학회지 Vol.31 No.6
- 발행연도
- 2014.6
- 수록면
- 513 - 519 (7page)
이용수
이 논문의 연구 히스토리 (2)
- 이 논문의 후속연구가 궁금하신가요?
- 연관 학술논문 또는 학술발표를 통해 보다 발전된 연구결과를 확인하실 수 있습니다.
- 이 논문의 연구 히스토리 확인하기
초록· 키워드
오류제보하기
For depth machining in die and mold, Electrical Discharge Machining (EDM) is used generally. To make deep hole and deep shape efficiently, cemented carbide endmill for depth machining is necessary. For this purpose, cemented carbide endmill was designed using design of experiment (DOE). To improve cutting performance, endmill was coated with multilayer surface treatment, TiAlCrSiN and TiAlCrN, for higher wear resistance. In order to evaluate the endmill, Transverse Rupture Strength (TRS) test was tried for investigating the relationship between surface treatment and strength in endmill body. Scratch test was also used for measuring adhesion force of each surface treatment. To evaluate hardness of surface treatment, Atomic Force Microscope (AFM) analysis was carried out. Wear test was executed for characteristics of each surface treatment in high temperature. Consequently, TiAlCrSiN was superior to the TiAlCrN coating in case of high temperature environment such as cutting.
목차
1. 서론
2. 엔드밀 형상 설계 및 절삭온도 예측
3. 표면처리층 특성평가
4. 결론
REFERENC
참고문헌 (11)
참고문헌 신청
Fox-Rabinovich, G. / 2008 / Wear Behavior of Adaptive Nano-multilayered TiALCrN/NbN Coatings under Dry High Performance Machining Conditions / Surface and Coatings Technology 202(10):2015~2022
Fox-Rabinovich, G. / 2009 / Design and Performance of ALTiN and TiALCrN PVD Coatings for Machining of Hard to Cut Materials / Surface and Coatings Technology 204(4):489~496
Santana, A. E. / 2004 / Micro Sturucture and Mechanical Behavior of TiAlCrN Multilayer Thin Films / Surface & Coatings Technology 177-178:334~340
Ning, L. / 2008 / Investigation of Wear Behavior and Chip Formation for Cutting Tools with Nano-multilayered TiAlCrN/NbN PVD Coating / International Journal of Machine Tools & Manufacture 48(6):656~665
Wang, S. Q. / 2011 / Effect of Al and Si Additions on Microstructure and Mechanical Properties of TiN Coatings / J. Cent. South Univ. Technol. 18:310~313
Fox-Rabinovich, G. / 2009 / Design and Performance of ALTiN and TiALCrN PVD Coatings for Machining of Hard to Cut Materials / Surface and Coatings Technology 204(4):489~496
Santana, A. E. / 2004 / Micro Sturucture and Mechanical Behavior of TiAlCrN Multilayer Thin Films / Surface & Coatings Technology 177-178:334~340
Ning, L. / 2008 / Investigation of Wear Behavior and Chip Formation for Cutting Tools with Nano-multilayered TiAlCrN/NbN PVD Coating / International Journal of Machine Tools & Manufacture 48(6):656~665
Wang, S. Q. / 2011 / Effect of Al and Si Additions on Microstructure and Mechanical Properties of TiN Coatings / J. Cent. South Univ. Technol. 18:310~313
이 논문의 저자 정보
이 논문과 함께 이용한 논문
Cu(In,Ga)Se₂ 박막의 저온 성장 및 NaF 후속처리를 통한 태양전지 셀 특성 연구
김승태
,
정광선
,
윤재호
외 2명
Current Photovoltaic Research
2015
.03
Development of High-Performance, Low-Cost 3D Printer Using LCD and UV-LED
조광호
,
장현석
,
하영명
외 1명
Journal of the Korean Society for Precision Engineering
2015
.10
Assessment of Tip Shape Effect on Rotor Aerodynamic Performance in Hover
Je Young Hwang
,
Oh Joon Kwon
International Journal of Aeronautical and Space Sciences
2015
.06
두께와 노치생성방법에 따른 플라스틱 수지의 충격강도 변화에 관한 연구
김현
,
이대섭
,
임재수
외 1명
폴리머
2012
.01
분말야금으로 제작된 M2 공구강과 Cu 간 기능성 경사 복합재의 물성 평가
정종설
,
신기훈
대한기계학회 논문집 A권
2014
.09
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-550-001570596