지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2011.10
- 수록면
- 325 - 330 (6page)
이용수
초록· 키워드
오류제보하기
RCP(Reactor coolant pump) must be designed to preserve it"s functions on normal or abnormal environments and seismic event same as operating basis earthquake(OBE) and safe shutdown earthquake(SSE). Generally, there are static and dynamic analytical method which can be applied by a floor response spectrum or time history analysis for the seismic qualification.
Initially, It was accomplished a detailed structural FE-model for finite element analysis on the bases of 3-dimensional solid model which was made by the RCP drawing. As the result of dynamic characteristic using the detailed FE-model, it"s shown about 12Hz natural frequency of 1st bending mode shape and maximum displacement has 11mm with the structural bending by single-point response spectrum(SPRS) method at all elevation. But maximum displacement has 7.6mm by multi-point response spectrum(MPRS) method which was applied to the three floor response spectrum at each elevation. Therefore, On a large heighten structures as RCP, The application by SPRS method causes to be more conservative results.
Finally, A simpled equivalent beam model which was developed by use of iteration of detailed FE-model is shown the result more similar with those of natural frequencies and SPRS analysis. And maximum equivalent stress and displacement of the simpled beam has verified with 180MPa and 7.1mm each at 15sec as results by SSE time history method.
Initially, It was accomplished a detailed structural FE-model for finite element analysis on the bases of 3-dimensional solid model which was made by the RCP drawing. As the result of dynamic characteristic using the detailed FE-model, it"s shown about 12Hz natural frequency of 1st bending mode shape and maximum displacement has 11mm with the structural bending by single-point response spectrum(SPRS) method at all elevation. But maximum displacement has 7.6mm by multi-point response spectrum(MPRS) method which was applied to the three floor response spectrum at each elevation. Therefore, On a large heighten structures as RCP, The application by SPRS method causes to be more conservative results.
Finally, A simpled equivalent beam model which was developed by use of iteration of detailed FE-model is shown the result more similar with those of natural frequencies and SPRS analysis. And maximum equivalent stress and displacement of the simpled beam has verified with 180MPa and 7.1mm each at 15sec as results by SSE time history method.
목차
ABSTRACT
1. 서론
2. 원자로냉각재펌프 구조물에 대한 해석
3. 결론
참고문헌
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
자기다짐콘크리트의 수직펌프압송 전후 물성 평가
이상현
,
기전도
,
문형재
외 3명
한국콘크리트학회 학술대회 논문집
2016
.05
표준형 통합 상태기반정비 (CBM) 기반 원심펌프 이상상태 진단기술 개발
강토
,
한순우
,
이정한
외 2명
한국소음진동공학회 학술대회논문집
2016
.04
LNG 2 차 고압 펌프를 모사한 RPM 별 3 점지지 Shaft Balancing 실험
최병근
,
박동희
,
김효중
외 3명
한국소음진동공학회 학술대회논문집
2016
.04
일체형 삼점지지 고압 LNG 2차 펌프 rotor의 1차 mode 특성을 고려한 Balancing 벡터선도 연구
최병근
,
박선휘
,
하정민
외 2명
한국소음진동공학회 학술대회논문집
2016
.04
원자로냉각재펌프 충격신호분석 연구
이상국
한국소음진동공학회 학술대회논문집
2016
.04
최근 본 자료
댓글(0)
0