지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
초록· 키워드
오류제보하기
Passing through the elapsed time since Kori Nuclear Power Plant (NPP) was constructed in 1978, Korea has established a world-class design, construction and safe operating techniques in the nuclear industry. During this period, nuclear industry has evolved dramatically and the NPP safety has been enhanced to accommodate the lessons learned from the catastrophic events such as the airplanes impact on World Trade Center and Pentagon and the tsunami disaster in the Fukushima NPP. Compare to cost and schedule, safety is and has always been the highest priority in NPP projects. The design of NPP structures has to satisfy special nuclear safety related regulatory and design standards requirements.
NPP structures can be classified as safety-related or nonsafety-related structures. The applied design codes and standards, such as but not limited to applied load types and load combinations, are significantly different between these structures. The design and construction of safety-related structures should be performed in accordance with special design codes and standards such as KEPIC SNB, KEPIC SNC, KEPIC SNG, etc. In addition, various safety-related regulatory requirements should be satisfied.
After the tsunami disaster of Fukushima NPP, the list of safetyrelated structures such as Reactor Containment Building (RCB), Auxiliary Building (AB), and Essential Service Water Intake Structure (ESWIS), has been expanded in order to improve the safety of NPP. Because of its unique characteristics, i.e. providing protections against radiation and pressure leakage, NPP structures are mainly consist of reinforced concrete or pre-stressed concrete. Under severe and extreme design and after the design-basis events, these structures have to maintain their structural integrity and able to function safely. Korea has played an important role in nuclear industry and is firmly committed to improve the safety of NPP structures.
NPP structures can be classified as safety-related or nonsafety-related structures. The applied design codes and standards, such as but not limited to applied load types and load combinations, are significantly different between these structures. The design and construction of safety-related structures should be performed in accordance with special design codes and standards such as KEPIC SNB, KEPIC SNC, KEPIC SNG, etc. In addition, various safety-related regulatory requirements should be satisfied.
After the tsunami disaster of Fukushima NPP, the list of safetyrelated structures such as Reactor Containment Building (RCB), Auxiliary Building (AB), and Essential Service Water Intake Structure (ESWIS), has been expanded in order to improve the safety of NPP. Because of its unique characteristics, i.e. providing protections against radiation and pressure leakage, NPP structures are mainly consist of reinforced concrete or pre-stressed concrete. Under severe and extreme design and after the design-basis events, these structures have to maintain their structural integrity and able to function safely. Korea has played an important role in nuclear industry and is firmly committed to improve the safety of NPP structures.
목차
머리말
원자로 건물의 기능과 구조특성
보조건물의 기능과 구조특성
구조물의 지진해석 및 내진설계
구조물의 해석 및 설계
설계기준 초과사고에 대한 안전성 확보
원전 구조물 모듈화 시공기술
맺음말
Abstract
참고문헌 (0)
참고문헌 신청이 논문의 저자 정보
이 논문과 함께 이용한 논문
원전용 LRB 면진장치 설계변위 결정에 관한 연구
이홍표
,
조명석
,
박준현
대한토목학회 학술대회
2015
.10
정지궤도위성 본체 구조물 개념설계 및 강도해석
김선원
,
김창호
,
김성훈
외 1명
한국항공우주학회 학술발표회 초록집
2012
.11
원전 시설 내진안전성 및 지진대응체계
현창헌
건축
2011
.05
퍼지 이론을 통한 위험 가중치 적용 공기산정 모델 구축에 관한 연구
조성
,
조용
,
방광수
외 2명
대한건축학회 논문집 - 구조계
2009
.07
원전 콘크리트 구조물 설계 및 시공 합리화 방안
김태홍
,
김동진
,
김민정
외 2명
한국콘크리트학회 학술대회 논문집
2011
.05
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2015-500-001690233