메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이경수 (Prairie View A&M Univ.) 하크 지아올 (Prairie View A&M Univ.) 한상을 (인하대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第30卷 第7號
발행연도
2014.7
수록면
21 - 28 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper presents the pointed tip effects on the aerodynamic load of The National Renewable Energy Laboratory (NREL) Phase VI wind blade rotor. The aerodynamic loads around flow field are evaluated using 3D CFD simulation. The commercial ANSYS CFX and parameterized 3D cad models of NREL Phase VI are used for the analyses. The Shear Stress Transport (SST) turbulence model and 0-degree yaw angle condition are adopted for CFD analysis. Nonlinear twist angles were adopted for the effects of nonlinear resultant wind speed. The linearly tapered shape was made by reducing the chord length linearly to the tip region. To find out the 3D aerodynamic effects, sectional pressure coefficient and integrated forces about primary axis, which are normal, tangent, thrust and torque, are evaluated. 7 wind speed cases (5m/s, 7m/s, 10m/s, 13m/s, 15m/s, 20m/s, 25m/s) with constant blade rotating speed (72 RPM) are considered. The pointed tip shape was made by reducing the original NREL chord length gradually near the tip region. The numerical difference of Cp on wind blade surface between original and modified pointed tip models is negligible except near tip region, and also shown good agreement with experimental result in low wind speed case. From the CFD simulation for pointed tip shape, the decreased value of surface integrated torque about primary axis are obtained because of the reduced surface area in pointed tip region, but it is negligible compared to total values. Rather it can help to increase the structural stability and reduce the vortex because of the reduced force coefficient on near the tip region

목차

Abstract
1. 서론
2. 풍력터빈 블레이드의 공기역학적 특성 및 공력계수의 산정
3. 포인트 팁이 고려된 NREL Phase 풍력터빈 블레이드 모델
4. 해석결과의 분석
5. 결론
참고 문헌

참고문헌 (13)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-500-002508110