지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2014.3
- 수록면
- 19 - 28 (10page)
이용수
초록· 키워드
오류제보하기
The filament winding method is widely used to manufacture products of fiber reinforced plastics (FRP), such as high pressure vessels, launch tubes and pipes. For reducing winding time, the method of winding by filament band which consists of several filament fibers is used. NC winding machine is used for precise winding and NC path is needed. Before filament winding, users should verify that winding path which presented by a line is appropriate by filament winding simulation. Also, the used length of each filament is different. So, if the peak filament exhausted, it causes to stop manufacturing. In this research, we developed software which visualizes 3D graphic of filament band winding path and simulates winding process on real time. And we proposed algorithm about calculation of each filament usage. We use geodesic equation for generating filament band surface and calculating the usage length of each filament.
목차
ABSTRACT
1. 서론
2. 필라멘트 밴드의 구성
3. 각 필라멘트의 사용길이 계산
4. 필라멘트 밴드 와인딩 과정의 가시화
5. 적용
6. 결론
References
참고문헌 (20)
참고문헌 신청
Kim, K. H. / 2013 / A Study of Hypervelocity Penetration Characteristics of Composite Landing Gear / Proceedings of the Society of CAD/CAM Engineers Conference :779~781
Peters, S.T / 2011 / Composite Filament Winding / ASM International
Koussios, S / 2004 / Filament Winding: a Unified Approach / Delft University Press
Shen, F. C. / 1995 / 1995, A Filament-wound Structure Technology Overview / Materials Chemistry and Physics 42(2):96~100
조현욱 / 2010 / 5축 볼엔드밀 가공 NC 데이터의 최적 공구 길이 계산 / 한국CAD/CAM학회 논문집 15(5):354~361
Peters, S.T / 2011 / Composite Filament Winding / ASM International
Koussios, S / 2004 / Filament Winding: a Unified Approach / Delft University Press
Shen, F. C. / 1995 / 1995, A Filament-wound Structure Technology Overview / Materials Chemistry and Physics 42(2):96~100
조현욱 / 2010 / 5축 볼엔드밀 가공 NC 데이터의 최적 공구 길이 계산 / 한국CAD/CAM학회 논문집 15(5):354~361
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0