메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이주형 (한국건설기술연구원) 곽대진 (에드벡트)
저널정보
한국해양공학회 한국해양공학회지 한국해양공학회지 제28권 제5호
발행연도
2014.10
수록면
484 - 492 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
For site verification, a prototype GFRP suction pile was produced, and a field test was performed in the field. The prototype hada diameter of 1.8 m and height of 3.0 m. To reduce the penetration resistance and buckling, the tip was reinforced with steel. The test-bed was located international water near the An-ma islands in the West Sea of Korea. The target layer was sedimented sand with SPT N-values of 20~40. The test-bed application showed a self-weight penetration of 0.5 m and a final penetration induced by suction of 2.2 m, which indicated that 96% of its entirebody was successfully penetrated. After penetrating the GFRP suction pile, a diver confirmed the good penetration. Averticality of 1.6° satisfied the criterion of 2.0°. For effective site installation, the site condition (depth, ground condition, etc.) had to be considered carefully to select the suction pressure to apply. The hybrid suction foundations were the group type. Thus, the seafloor condition, waves, and tidal current affected the caisson installation process (e.g., pile installation sequence, suction pressure, and amount of penetration). Therefore, further studies are required to improve the reliability and efficiency.

목차

ABSTRACT
1. 서론
2. GFRP 석션파일
3. 구조 안정성 해석
4. 현장 실험 및 결과
5. 결론
References

참고문헌 (12)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2015-550-002702136