메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
나종승 (한양대학교) 유경태 (한양대학교) 박경훈 (한양대학교) 박형진 (한양대학교) 이주 (한양대학교) 문승재 (한양대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2015년도 하계학술발표대회
발행연도
2015.6
수록면
781 - 784 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This paper proposed two type of thermal equivalent circuit (TEC) to estimate the temperature of wound rotor synchronous motor (WRSM) with water jacket. The steady-state temperature of each TEC was compared with three-dimensional finite element (FEM) and experimental result. The first TEC is the inner air (end cap air, air gap) temperature fixed model, of which rotor and stator part temperature was separately calculated by node analysis. The temperature of rotor part was well matched with the FEM analysis result within 6%. But in stator part, the temperature difference compared with experimental result was almost 30%. The other type of TEC is not fixed inner air temperature model that is connected by inner air. The rotor part temperature of full TEC was similar to that of first TEC analysis except shaft. However, in stator part, the temperature difference to the experimental result was decreased within 10%. For considering heat transfer rate of water jacket that is almost 95% of total heat sources, shaft and housing should be connected in thermal analytical model.

목차

Abstract
1. 서론
2. 해석모델 및 해석방법
3. 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-553-001572597