목적: 이 연구의 목적은 다양한 이원 중합 레진 시멘트의 수분 흡착도를 조사하고, 수분 흡착에 따른 미세 경도 변화를 비교해보는 것이다. 연구 재료 및 방법: 다섯 가지의 이원중합 레진시멘트를 선정하였다(Maxcem, Duo-link, Panavia F, VariolinkⅡ, Rely X Unicem). 각 그룹 당 10개씩, 총 50개의 시편을 제작하였다.각 그룹 당 5개의 시편들을 증류수에 7일 동안 보관 후 수분흡착도를 평가하였다. 증류수에 보관한 시편과 보관하지 않은 시편들을 비교하여 결과를 얻었다. 결과: 1. 수분 흡착도에 있어서 Maxcem이 유의성 있게 가장 높았다. 2. 증류수에 보관하지 않았던 시편의 미세 경도는 Rely X Unicem의 유의성 있게 가장 높았다. 3. 증류수에 보관하였던 시편의 미세 경도는 Rely X Unicem이 유의성 있게 가장 높았다. 4. 수분 흡수에 따른 미세 경도의 변화에 있어서 VariolinkⅡ는차이가없는것으로나타났으나, Duo-link, Panavia F, 그리고 Rely X Unicem은 감소되었으며, Maxcem은 증가되었다. 결론: 임상적으로 레진시멘트 선택시 수분 흡착도가 작고, 미세 경도가 높은 재료를 선택하는 것이 추천된다.
Purpose: This study examined the water sorption of commonly used dual-cure resin cements and compared the change in the micro-hardness among the cements. Materials and Methods: Five types of dual-cure resin cements (Maxcem, Duo-link, Panavia F, Variolink II, Rely X Unicem) were selected. Fifty specimens were classified into five groups containing ten specimens in each group. The water sorption of the five specimens in each group was evaluated after being immersed in distilled water (DDW) for seven days. The following results were obtained by comparing the specimens immersed in DDW with those not immersed in DDW. Results: 1. The water sorption of Maxcem showed the highest score, followed by Panavia F. These two cements were followed by Duo-link and Rely X Unicem. The water sorption of Variolink II showed the lowest score among the cements used in this study. 2. Among the specimens not immersed in DDW, the micro-hardness of Rely X Unicem showed the highest score followed by Panavia F and Variolink II. These cements were followed in order by Duo-link and Maxcem. 3. Among the specimens immersed in DDW, the microhardness of Rely X Unicem showed the highest score followed by Maxcem, Panavia F and Variolink II. Duo-link shoed the lowest score among the cements used in this study. 4. Maxcem, Duo-link, Panavia F and Rely X Unicem showed significant differences in micro-hardness due to water resorption but Variolink II was unaffected by immersion in water. Conclusion: Using the resin cement which has lower water sorption and higher micro-hardness is recommended.