메뉴 건너뛰기

ENG

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
(세종대학교) (세종대학교) (세종대학교) (세종대학교) (세종대학교) (세종대학교)
저널정보
한국기후변화학회 한국기후변화학회지 Journal of Climate Change Research Vol.6 No.3
발행연도
수록면
175 - 184 (10page)
DOI
10.15531/ksccr.2015.6.3.175

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
이 논문의 연구방법이 궁금하신가요?
🏆
연구결과
이 논문의 연구결과가 궁금하신가요?
AI에게 요청하기
추천
검색
질문

초록· 키워드

In this study GC and PAS were used to calculate N₂O concentration of exhaust gas from Wood Chip combustion system. Fuel supplied to the incinerator was collected and analyzed and then the analysis result was used to calculate N₂O emissions. Tier 3 and Tier 4 Method were used to calculate the N₂O emissions. Plant"s Specific emission factor of N₂O by Tier 3 Method was 0.35 kg/TJ, while default emission factor of Wood?Wood Waste proposed by 2006 IPCC G/L was 4 kg/TJ. So the N₂O emission factor of this study was 3.65 kg/TJ lower compared to the IPCC G/L. The total emissions calculated by Plant"s specific emission factor was 4.22 kg during the measuring period, but by Tier 4 Method it was 7.88 kg. This difference in emissions was caused by the difference of continuous measuring and intermittent sampling. It would be necessary to apply continuous measuring to calculate emissions of Non-CO₂ gas whose the density distribution is relatively high. However currently, according to the target management guideline of greenhouse gas and energy, the continuous measuring method to calculate greenhouse gas emission is applied only to CO₂. Therefore for reliable greenhouse gas emission calculation it would be necessary to apply continuous measuring to calculate Non-CO₂ gas emission.
#Greenhouse Gas Emissions #N₂O #Biomass #Wood Chip
상세정보 수정요청해당 페이지 내 제목·저자·목차·페이지
정보가 잘못된 경우 알려주세요!

목차

  1. ABSTRACT
  2. 1. 서론
  3. 2. 연구 방법
  4. 3. 연구 결과
  5. 4. 결론
  6. REFERENCES

참고문헌

참고문헌 신청

최근 본 자료

전체보기
260429_DBpiaAI
260319_딥리서치
260319_AI리더
260304_새학기에이전트
260428 이주의질문
260304_아그논문롤
260127_아그논문
260127_AI뷰어
UCI(KEPA) : I410-ECN-0101-2016-453-001887150