메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김대윤 (중앙대학교) 이민환 (경인기계) 소헌영 (경인기계) 이정희 (서강대학교) 이성혁 (중앙대학교)
저널정보
대한설비공학회 대한설비공학회 학술발표대회논문집 대한설비공학회 2015년도 동계학술발표대회 논문집
발행연도
2015.11
수록면
20 - 23 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
To date, the demand for plume reduction at the outlet of cooling tower has been continuously increased to overcome the air pollution and visual discomfort. The main objective of present study is to investigate the plume reduction for different induction systems by using a commercial CFD code (FLUENT V.16.1). The three-dimensional geometry data and industrial operating conditions were supported by KIMCO to calculate thermo-fluid flows. The user-defined function was programmed to simulate the heat and mass transfer in the filler region of cooling tower. From the numerical results, it was found that the outlet gas mixing rate with ambient air increased with the contact area of cylinder. In particular, the grid number density having relative humidity over 100% decreased at the outlet surface due to mixing with the additionally induced ambient air. Moreover, the venture effect on induction system enhanced the vertical momentum of outlet air to prevent the recirculation problem. Finally, these CFD results would be useful in designing the induction system for plume reduction.

목차

Abstract
1. 서론
2. 연구 내용
3. 해석 결과 및 고찰
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-553-002132239