메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
Indong Jun (Korea Institute of Science and Technology) Jee-Wook Lee (Kookmin University) Myoung-Ryul Ok (Korea Institute of Science and Technology) Yu-Chan Kim (Korea Institute of Science and Technology) Hojeong Jeon (Korea Institute of Science and Technology)
저널정보
한국표면공학회 한국표면공학회지 한국표면공학회지 제49권 제1호
발행연도
2016.2
수록면
20 - 25 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Femtosecond laser ablation of ultrathin polymer films on quartz glass using laser pulses of 100 fs and centered at λ=400 nm wavelength has been investigated for nanometer precision thin film patterning. Singleshot ablation craters on films of various thicknesses have been examined by atomic force microscopy, and beam spot diameters and ablation threshold fluences have been determined by square diameter-regression technique. The ablation thresholds of polymer film are about 1.5 times smaller than that of quartz substrate, which results in patterning crater arrays without damaging the substrate. In particular, at a 1/e<SUP>2</SUP> laser spot diameter of 0.86 μm, the smallest craters of 150-nm diameter are fabricated on 15-nm thick film. The ablation thresholds are not influenced by the film thickness, but diameters of the ablated crater are bigger on thicker films than on thinner films. The ablation efficiency is also influenced by the laser beam spot size, following a w<SUB>0q</SUB><SUP>-0.45</SUP> dependence.

목차

Abstract
1. Introduction
2. Experiments
3. Results and Discussion
4. Conclusion
References

참고문헌 (28)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-581-002663555