지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
이용수
초록· 키워드
오류제보하기
Objective: This study aims to draw the characteristics of occupational accidents occurred in cabling work, and assess accident severity based on occupational injury data.
Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea.
Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury.
Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as "High" level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process.
Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.
Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea.
Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury.
Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as "High" level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process.
Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.
목차
1. Introduction
2. Methods
3. Results
4. Discussion and Conclusion
References
참고문헌 (8)
참고문헌 신청
[학술지(정기간행물)] - Davis, P.R. / 1980 / Pattern of accident distribution in the telecommunications industry / British Journal of Industrial Medicine 37 : 175 ~ 179
[인터넷자원] - ILO / / Telecommunications – ILO Encyclopedia of Occupational Health and Safety
[학술지(정기간행물)] - Jeong, B.Y. / 1998 / Occupational deaths and injuries in the construction industry / Applied Ergonomics 29 (5) : 355 ~ 360
[학술지(정기간행물)] - 김양래 / 2015 / A Comparative Analysis of Occupational Accidents between Indoor and Outdoor Workers in Telecommunications Industry / 대한인간공학회지 34 (5) : 519 ~ 529
[학술지(정기간행물)] - Leigh, J. / 1990 / Personal and environmental factors in coal mining accidents / Journal of Occupational Accidents 13 : 233 ~ 250
[인터넷자원] - ILO / / Telecommunications – ILO Encyclopedia of Occupational Health and Safety
[학술지(정기간행물)] - Jeong, B.Y. / 1998 / Occupational deaths and injuries in the construction industry / Applied Ergonomics 29 (5) : 355 ~ 360
[학술지(정기간행물)] - 김양래 / 2015 / A Comparative Analysis of Occupational Accidents between Indoor and Outdoor Workers in Telecommunications Industry / 대한인간공학회지 34 (5) : 519 ~ 529
[학술지(정기간행물)] - Leigh, J. / 1990 / Personal and environmental factors in coal mining accidents / Journal of Occupational Accidents 13 : 233 ~ 250
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
딥러닝 기법을 활용한 높은 건설현장에서의 위험도 기반 추락 검출
한국정밀공학회 학술발표대회 논문집
2022 .10
-
중·고령자의 최소발끝높이 특성에 따른 걸려 넘어짐 위험성
한국안전학회지
2019 .01
-
A Study on Process Safety Incident Precursors to Prevent Major Process Safety Incidents in the Yeosu Chemical Complex
화학공학
2018 .01
-
잠재 심각도 평가 기반의 조선업 재해 분석 활동에 관한 사례 연구
한국안전학회지
2019 .01
-
사고사례 분석을 통한 건설현장 추락재해 위험성 평가에 관한 연구
한국산학기술학회 논문지
2022 .12
-
낙상 재현을 위한 보행자 생체 정보 기반의 낙상 유도 시스템 개발
로봇학회 논문지
2020 .09
-
A Comparative Analysis of Occupational Accidents between Indoor and Outdoor Workers in Telecommunications Industry
대한인간공학회지
2015 .10
-
관성 센서를 이용한 충격 전 추락 감지
한국정밀공학회 학술발표대회 논문집
2020 .09
-
간호·간병통합서비스병동 노인입원환자의 낙상위험지각, 낙상관련 효능감 및 낙상예방행위에 대한 연구
한국산학기술학회 논문지
2023 .04
-
최하사점을 고려한 안전대 고정점 선정에 대한 연구
한국산학기술학회 논문지
2022 .05
-
환자낙상에 영향을 주는 환경, 의료과정, 그리고 환자 관련 요소에 관한 연구 - 미국의 일반내과병동 환자낙상 데이터 분석을 통한 후향성 연구
의료·복지 건축(구 한국의료복지시설학회지)
2018 .01
-
Finding on Preventive Intervention of Fatal Occupational Injuries Through Empirical Analysis of Accident Death
한국안전학회지
2019 .01
-
에이다 부스트를 활용한 건설현장 추락재해의 강도 예측과 영향요인 분석
대한건축학회 논문집 - 구조계
2019 .11
-
에어서스펜션 시스템의 승차감 및 조종안정성 향상을 위한 최적 차고 선정 연구
한국자동차공학회 추계학술대회 및 전시회
2017 .11
-
Design of Falling Context-aware System based on Notification Service using Location Information and Behavior Data
International journal of internet, broadcasting and communication : IJIBC
2018 .01
-
건설 사고사례 기반 위험요소별 위험도 시각화
대한건축학회 학술발표대회 논문집
2023 .04
-
입원 아동의 낙상영향요인 -퇴원손상심층조사 자료를 이용하여-
한국산학기술학회 논문지
2020 .07
-
컴퓨터 비전을 이용한 이미지 기반 아이 키 측정 애플리케이션 개발
한국전자통신학회 논문지
2021 .01
-
Design of Cloud-based Context-aware System Based on Falling Type
International journal of internet, broadcasting and communication : IJIBC
2017 .01
-
건물청소원 직종의 위험성평가 매트릭스 도출 및 재해예방
대한인간공학회지
2018 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-530-000860033