지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2017.12
- 수록면
- 239 - 246 (8page)
이용수
초록· 키워드
오류제보하기
Recently fiber-reinforced thermoplastic composites have attracted great interest from industry and study because they offer unique properties such as high strength, modulus, impact resistance, corrosion resistance, and damping reduction which are difficult to obtain in single-component materials. The demand for plastics is steadily increasing not only in household goods, packaging materials, but also in high-performance engineering plastic and recycling. As a result, the technology of recycling plastic is also attracting attention. In particular, many paper have studied recycling systems based on recycled thermoplastics. In this paper, properties of Glass Fiber Reinforced Thermoplastic(GFRTP) materials were evaluated using recycled PET for injection molding bicycle frame. The effect on thermal and mechanical properties of recycled PET reinforced glass chop fiber according to fiber cross section and fiber content ratio were studied. And it was compared void volume and torque energy by glass fiber cross section, which is round section and flat section. Mechanical characteristics of resulting in GF/rPET has been increased by increasing fiber contents, than above a certain level did not longer increased. And mechanical properties of flat glass fiber reinforced rPET with low void volume were most excellent.
목차
Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
References
참고문헌 (13)
참고문헌 신청
[학술지(정기간행물)] - S. Luigi / 2017 / Effect of Temperature on Static and Low Velocity Impact Properties of Thermoplastic Composites / Composites:Part B 113 (15) : 110 ~
[학술지(정기간행물)] - S. J. Pickering / 2006 / Recycling Technologies for Thermoset Composite Materials Current Status / Composites Part A: Applied Science and Manufacturing 37 (8) : 1206 ~
[학술지(정기간행물)] - 이기영 / 2011 / 목분강화 재활용폴리에틸렌 그린복합재료의 기계적 특성, 충격 특성 및 열변형온도 / 엘라스토머 및 콤포지트 46 (3) : 223 ~ 230
[학술지(정기간행물)] - Y. Yamamoto / 2004 / Friction andWear of Water Lubricated PEEKand PPS SlidingContacts: Part 2, CompositeswithCarbon orGlass Fibre / Wear 257 (1-2) : 181 ~
[학술지(정기간행물)] - B. P. Jang / 1992 / ImpactBehavior and Impactfatigue Testing of PolymerComposites / Composites Science and Technology 44 (2) : 107 ~
[학술지(정기간행물)] - S. J. Pickering / 2006 / Recycling Technologies for Thermoset Composite Materials Current Status / Composites Part A: Applied Science and Manufacturing 37 (8) : 1206 ~
[학술지(정기간행물)] - 이기영 / 2011 / 목분강화 재활용폴리에틸렌 그린복합재료의 기계적 특성, 충격 특성 및 열변형온도 / 엘라스토머 및 콤포지트 46 (3) : 223 ~ 230
[학술지(정기간행물)] - Y. Yamamoto / 2004 / Friction andWear of Water Lubricated PEEKand PPS SlidingContacts: Part 2, CompositeswithCarbon orGlass Fibre / Wear 257 (1-2) : 181 ~
[학술지(정기간행물)] - B. P. Jang / 1992 / ImpactBehavior and Impactfatigue Testing of PolymerComposites / Composites Science and Technology 44 (2) : 107 ~
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
A study on the change of mechanical strength according to the mixing conditions of recycled carbon fiber
한국생산제조학회 학술발표대회 논문집
2022 .05
-
Seismic Retrofitting of RC Circular Columns Using Carbon Fiber, Glass Fiber, or Ductile PET Fiber
International Journal of Concrete Structures and Materials
2021 .11
-
Carbon fiber recycling from CFRPs with a super-heated steam method
한국자동차공학회 지회 학술대회 논문집
2016 .04
-
Prediction of the Fracture of Fiber Reinforced Plastic Material Considering Interfacial Failure Shear Strength between PET and Glass Fiber
한국고분자학회 학술대회 연구논문 초록집
2016 .10
-
Comparative analysis of carbon fiber reinforced composites: evaluation of recycled carbon fiber by recycling method as a commercial grade replacement
한국생산제조학회 학술발표대회 논문집
2024 .12
-
유리섬유 코팅사와 탄소섬유를 이용한 일방향 탄소섬유시트 제조 공정이 콘크리트 보강에 미치는 영향
한국염색가공학회지
2022 .09
-
재활용 탄소섬유의 배합 조건에 따른 기계적 강도 변화에 관한 연구
한국생산제조학회 학술발표대회 논문집
2024 .12
-
Eco-friendly and Cost Effective Recycling of Carbon Fiber Reinforced plastic
한국고분자학회 학술대회 연구논문 초록집
2016 .04
-
흡습 환경 하의 폴리프로필렌/유리 섬유 강화 복합재료의 환경 열화 특성
한국해양공학회지
2016 .12
-
Carbon Chopped Fiber 혼입량에 따른 아스팔트 혼합물의 물리적 특성
한국섬유공학회지
2016 .01
-
Investigation of Chip Shapes according to Cutting Tool in Drilling of Hybrid Composite for Fiber Recycling
한국정밀공학회 학술발표대회 논문집
2021 .11
-
Experimental investigating the properties of fiber reinforced concrete by combining different fibers
Computers and Concrete, An International Journal
2020 .01
-
보트에 적용되는 하이브리드 복합재에 대한 기계적 특성 연구
대한용접·접합학회지
2016 .04
-
고온 열가소성 복합재를 이용한 기계적 재활용 압축성형 공정 최적화 연구
한국정밀공학회 학술발표대회 논문집
2022 .05
-
슈퍼섬유 Chopped fiber와 고무와의 Compound에 따른 기계적 물성연구
한국염색가공학회지
2016 .09
-
탄소섬유 복합재 재활용 및 업싸이클링
한국생산제조학회 학술발표대회 논문집
2022 .12
-
Development of PU-GF Composites by Content of Glass Fiber
한국고분자학회 학술대회 연구논문 초록집
2023 .04
-
Hybrid Effects of Surface Treated Pitch-based Short Carbon Fiber and Short Glass Fiber Reinforced Thermoplastic Composites
한국고분자학회 학술대회 연구논문 초록집
2019 .10
-
Corrosion effects on mechanical behavior of steel fiber reinforced concrete, including fibers from recycled tires
Computers and Concrete, An International Journal
2020 .01
-
Surface Modified Glass-Fiber Effect on the Mechanical Properties of Glass-Fiber Reinforced Polypropylene Composites
Elastomers and composites
2019 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0