Effects of the Lift Valve Opening Area on Water Hammer Pump Performance and Flow Behavior in the Valve Chamber

Saito, Sumio; Dejima, Keita; Takahashi, Masaaki; Hijikata, Gaku; Iwamura, Takuya

doi:http://dx.doi.org/10.5293/IJFMS.2012.5.3.109

추천

검색

질문

자료유형: 학술저널

저자정보: Saito, Sumio Dejima, Keita Takahashi, Masaaki Hijikata, Gaku Iwamura, Takuya

저널정보: 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.5 No.3

발행연도: 2012.9

수록면: 109 - 116 (8page)

DOI: http://dx.doi.org/10.5293/IJFMS.2012.5.3.109

이용수

📌

연구주제

📖

연구배경

🔬

연구방법

🏆

연구결과

초록· 키워드

오류제보하기

Water hammer pumps can effectively use the water hammer phenomenon for water pumping. They are capable of providing an effective fluid transport method in regions without a well-developed social infrastructure. The results of experiments examining the effect of the geometric form of water hammer pumps by considering their major dimensions have been reported. However, these conventional studies have not fully evaluated pump performance in terms of pump head and flow rate, common measures of pump performance. The authors have focused on the effects on the pump performance of various geometric form factors in water hammer pumps. The previous study examined how the hydrodynamic characteristics was affected by the inner diameter ratio of the drive and lift pipes and the angle of the drive pipe, basic form factors of water hammer pumps. The previous papers also showed that the behavior of water hammer pump operation could be divided into four characteristic phases. The behavior of temporal changes in valve chamber and air chamber pressures according to the air volume in the air chamber located downstream of the lift valve was also clarified in connection with changes in water hammer pump performance. In addition, the effects on water hammer pump performance of the length of the spring attached to the drain valve and the drain pipe angle, form factors around the drain valve, were examined experimentally. This study focuses on the form of the lift valve, a major component of water hammer pumps, and examines the effects of the size of the lift valve opening area on water hammer pump performance. It also clarifies the behavior of flow in the valve chamber during water hammer pump operation.

#Fluid Transients #Pump Performance #Water Hammer Pump #Pressure Fluctuation #Lift Valve Opening Area

참고문헌 (11)

참고문헌 신청

1. [단행본] - Kagami, K. / 2001 / Water hammer pump production handbook (in Japanese) / POWERSHA Inc : 47 ~

2. [학술지(정기간행물)] - Yunoki, T. / 2004 / Production of a Hydraulic Ram Pump and its Research on its Characteristic / Japan Society for Science Education 28 (2) : 94 ~ 100

3. [학술대회논문] - Tessema, A. A. / 2000 / Hydraulic Ram Pump System Design and Application / Proceedings ESME 5th Annual Conference on Manufacturing and Process Industry : 1 ~ 8

4. [학술지(정기간행물)] - Hasegawa, S. / 1984 / Trial of Hydraulic Ram and Its Performance Characteristics / Research Reports of Toyota College of Technology (17) : 15 ~ 20

5. [학술지(정기간행물)] - Taye, T. / 1998 / Hydraulic Ram Pump / Journal of the ESME 1 : 1 ~ 11