지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 저널정보
- 한국유체기계학회 International Journal of Fluid Machinery and Systems International Journal of Fluid Machinery and Systems Vol.9 No.1
- 발행연도
- 2016.3
- 수록면
- 75 - 84 (10page)
- DOI
- http://dx.doi.org/10.5293/IJFMS.2016.9.1.075
이용수
초록· 키워드
오류제보하기
Fluid-dynamic design of fluid machinery had heavily relied on empiricism and experimental observations for many years. Since 1980s, thanks to the advancements in Computational Fluid Dynamics (CFD), a variety of flow physics have been revealed. The contribution by CFD is indispensable; however, the challenge is required not only on the advancements in CFD technologies but also innovation of "design (optimization) technologies" because of the complex interactions between 3-D flow fields and the complex 3-D flow passage configurations, etc. This paper presents historical perspective on fluid machinery flow optimization in an industry with some messages for the future.
목차
등록된 정보가 없습니다.
참고문헌 (15)
참고문헌 신청
[학술지(정기간행물)] - Inokuchi, A. / 1905 / Theory of Ordinary Centrifugal Pumps and of a New Centrifugal Pumps having Divergent Vortex Chamber Provided with Guide Vanes for Producing Forced Vortex / The Journal of the College of Engineering, Tokyo Imperial University, Japan II (4)
[학술지(정기간행물)] - Goto, A. / 1992 / Study of Internal Flow in a Mixed Flow Pump Impeller at Various Tip Clearances Using 3-D Viscous Flow Calculations / ASME Journal of Turbomachnery 114 : 373 ~ 382
[학술지(정기간행물)] - Goto, A. / 1996 / Suppression of Secondary Flows in a Mixed Flow Pump Impeller by Application of 3-D Inverse Design Method / ASME Journal of Turbomachinery 118 : 544 ~ 551
[학술대회논문] - Ashihara, K. / 2001 / Turbomachinery Blade Design using 3D Inverse Design Method, CFD and Optimization Algorithm / ASME Turbo Expo
[학술대회논문] - Takayama Y. / 2009 / Multi-Objective Optimization of a Mixed-Flow Pump / ASME Fluids Engineering Division Summer Meeting Vail
[학술지(정기간행물)] - Goto, A. / 1992 / Study of Internal Flow in a Mixed Flow Pump Impeller at Various Tip Clearances Using 3-D Viscous Flow Calculations / ASME Journal of Turbomachnery 114 : 373 ~ 382
[학술지(정기간행물)] - Goto, A. / 1996 / Suppression of Secondary Flows in a Mixed Flow Pump Impeller by Application of 3-D Inverse Design Method / ASME Journal of Turbomachinery 118 : 544 ~ 551
[학술대회논문] - Ashihara, K. / 2001 / Turbomachinery Blade Design using 3D Inverse Design Method, CFD and Optimization Algorithm / ASME Turbo Expo
[학술대회논문] - Takayama Y. / 2009 / Multi-Objective Optimization of a Mixed-Flow Pump / ASME Fluids Engineering Division Summer Meeting Vail
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
2024년 CFD 분야 연구동향 분석
한국유체기계학회 논문집
2025 .04
-
국내 학교 체육관의 실내 PM2.5 저감을 위한 CFD 분석 연구
한국생태환경건축학회 학술발표대회 논문집
2021 .05
-
Two-Phase Flow Simulations Using Volume-of-Fluid and Two-Fluid Models
대한기계학회 춘추학술대회
2019 .11
-
Unsteady Flow Condition of Centrifugal Pump for Low Viscous Fluid Food
International Journal of Fluid Machinery and Systems
2017 .12
-
Shape Design Optimization for Improving Performance of Implantable Artificial Bladder Urine Voiding Actuator and Fluid Storage Using CFD Analysis
한국전산유체공학회 학술대회논문집
2022 .10
-
Shape Design Optimization for Improving Performance of Implantable Artificial Bladder Urine Voiding Actuator and Fluid Storage Using CFD Analysis
한국전산유체공학회 학술대회논문집
2022 .10
-
Contribution of Fluid Machinery to Achieving Carbon Neutrality - Research and Development of Cryogenic Fluid Machinery
한국유체기계학회 학술대회 논문집
2024 .12
-
노즐 출구에서 외부 유체 조건에 따른 유동의 가시화 특성
한국기계기술학회지
2016 .01
-
Breaking Down Barriers to Fluid Machinery Design : Democratizing Optimization
한국유체기계학회 학술대회 논문집
2024 .12
-
CFD를 이용한 테일러 반응기의 유동해석
대한기계학회 춘추학술대회
2018 .04
-
Topology optimization of two-phase fluid
대한기계학회 춘추학술대회
2023 .05
-
CFD를 이용한 테일러 반응기의 3차원 유동해석
한국전산유체공학회 학술대회논문집
2017 .05
-
Multi-Objective Shape Optimization for Vehicle Aerodynamics Performance Considering the Body Proportions
한국전산유체공학회 학술대회논문집
2022 .10
-
Numerical Simulation on Membrane Emulsification – Study the Effect of Process Parameters on Droplet Size
한국유체기계학회 학술대회 논문집
2024 .07
-
Numerical Optimization on Design of Heat Exchanger Manifolds
대한기계학회 춘추학술대회
2017 .11
-
A deep learning approach for design optimization problem of fluid mechanics
대한기계학회 춘추학술대회
2020 .12
-
CFD해석을 통한 글로브밸브에서의 개폐부 형상에 따른 유동특성 분석
한국생산제조학회 학술발표대회 논문집
2022 .07
-
CFD를 활용한 에어컨 팬 수에 따른 속도 및 유량 분석
한국기계가공학회 춘추계학술대회 논문집
2022 .04
-
Numerical simulation of two-phase flow using coupled Level-set and Volume-of-Fluid method
대한기계학회 춘추학술대회
2022 .11
-
Colloidal Interactions at or Near Fluid−fluid Interfaces
한국고분자학회 학술대회 연구논문 초록집
2020 .10
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2018-554-001894164