인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
피인용 0
초록·키워드
Poly-DCPD type epoxy resin and composite materials were prepared reaction injection molding(RIM) polymerization from polyamide based curing agents(G-5022:G-0930) with inorganic filler(SiO₂, Cu₂O, CuO and CaO). and the effects of composite on the impact strength, flexural strength and surface hardness of the reinforced poly-DCPD type epoxy resin were experimentally examined.
Impact strength and flexural strength increased as the amount of SiO₂ added increased. but decreased at more than 0.6wt%. also surface hardness showed a constant value regardless of the addition amount. and impact strength and flexural strength increased as the size of SiO₂ particles was smaller. it was found that the surface hardness had little effect.
The impact strength, flexural strength and surface hardness were highest when Cu₂O was used as a filler. SiO₂ and CuO were similar to each other. and the curing temperature was increased, impact strength, flexural strength and surface hardness did not changed.
Impact strength and flexural strength increased as the amount of SiO₂ added increased. but decreased at more than 0.6wt%. also surface hardness showed a constant value regardless of the addition amount. and impact strength and flexural strength increased as the size of SiO₂ particles was smaller. it was found that the surface hardness had little effect.
The impact strength, flexural strength and surface hardness were highest when Cu₂O was used as a filler. SiO₂ and CuO were similar to each other. and the curing temperature was increased, impact strength, flexural strength and surface hardness did not changed.
본문·목차
인공지능 문자 인식 모델을 통해 추출된 텍스트로, 일부 오타나 오류가 포함될 수 있으나 지속적으로 개선 중입니다.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
오류를 발견하셨다면 해당 부분을 드래그한 후 ' 를 통해 신고해주세요.
최근 본 자료 전체보기
UCI(KEPA) : I410-ECN-0101-2018-454-001852327
