메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
한순우 (Korea Atomic Energy Research Institute (KAERI)) 김재은 (Daegu Catholic University)
저널정보
한국소음진동공학회 한국소음진동공학회논문집 한국소음진동공학회논문집 제28권 제3호(통권 242호)
발행연도
2018.6
수록면
320 - 329 (10page)
DOI
10.5050/KSNVE.2018.28.3.320

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Aimed at a self-powered real-time pipe-wall-thinning monitoring system, a piezoelectric vibration energy harvesting device is installed on a pipe in a pipeline system with internal fluid flow and its plausibility as a power source of a sensor node is checked experimentally. To this end, a bimorph cantilevered plate with two piezoelectric single crystal layers is designed to a measured excitation frequency of 154 Hz, the average output power of which is measured to be around 30 μW/(m/s<SUP>2</SUP>)<SUP>2</SUP> in the laboratory test using a electrodynamic shaker. To clamp the designed bimorph cantilevered plate on a vibrating curved surface of a pipe with little effects on its modal properties, a band-type mounting scheme is proposed in this work. It is experimentally shown that piezoelectric vibration energy harvesting can be an alternative to battery-powered solutions, though the reliability issue still remains.

목차

ABSTRACT
1. 서론
2. 진동 환경 측정 및 설계 고려 사항
3. 에너지 수확 장치의 설계 및 성능 검증
4. 결론
References

참고문헌 (23)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-424-002215075