메뉴 건너뛰기
소속 기관 / 학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
(Suzhou Institute of Trade & Commerce) (Fourth Affiliated Hospital of Inner Mongolia Medical University) (Suzhou Institute of Trade & Commerce) (Suzhou Institute of Trade & Commerce) (Soochow University) (Soochow University)
저널정보
한국고분자학회 폴리머 폴리머 제42권 제5호
발행연도
수록면
721 - 728 (8page)
DOI
10.7317/pk.2018.42.5.721

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
이 논문의 연구방법이 궁금하신가요?
🏆
연구결과
이 논문의 연구결과가 궁금하신가요?
AI에게 요청하기
추천
검색
질문

초록· 키워드

In this work, silk fibroin (SF) filament with fibrils regenerated by dissolving in CaCl₂-formic acid (FA) was prepared by wet-spun method at room temperature. Different from traditional dissolved methods, SF solutions obtained by dissolving in CaCl₂-FA preserved fibrils, which have been recognized as the key to the high performance of native silk. The morphology of SF filament was analyzed, very dense filaments with smooth surface and circular, nanofibrils could be observed in longitudinal and cross-sections of filaments. Moreover, the breaking stress of samples was gradually increased with the increase of draw-down ratios. After 3 times drawing, the breaking stress and elongation at break of filament were 276.4±22.6 MPa and 40.8±3.1%, respectively. At the same time, the secondary structure of SF filament was typical β-sheet. In addition, SF filaments showed excellent degradation property, the mass lost of SF filament declined 42% after incubating in protease XIV solution. Above all, the human mesenchymal stem cells (hMSCs) adhered very well on the surface of the filaments, which demonstrated the good biocompatibility of SF filaments, was suitable for application in tissue engineering.
상세정보 수정요청해당 페이지 내 제목·저자·목차·페이지
정보가 잘못된 경우 알려주세요!

목차

  1. Abstract
  2. Introduction
  3. Experimental
  4. Results and Discussion
  5. Conclusions
  6. References

참고문헌

참고문헌 신청

최근 본 자료

전체보기