지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.3
- 수록면
- 502 - 506 (5page)
- DOI
- 10.5370/KIEE.2019.68.3.502
이용수
초록· 키워드
오류제보하기
A sensor for constructing an In-line roundness measuring device has a tough characteristic on a foreign matter existing on the surface during grinding processing, selects a non-contact eddy current sensor which is excellent in durability and does not cause surface scratches The objective was set to constitute a device capable of performing In - Line roundness measurement and to make it possible to measure by applying the theory of circularity of three points method. In this study, when three displacement sensor signals of the input values of the 3 point circularity algorithm are composed only of the sample shape and the vibration signal by simulation in consideration of the characteristics of the non-contact eddy current sensor, three displacement sensors Using the output of 3 point method to know the roundness was able to confirm the roundness shape of the input sample analogized to a certain value by the vibration protest canceling by the prism. Also, from the output of the displacement sensor, it can be considered that if the system noise is not included, the shape of the input sample can be completely estimated.
목차
Abstract
1. 서론
2. 진원도 측정이론 및 측정장치 구성
3. 시뮬레이션
4. 결론
References
참고문헌 (10)
참고문헌 신청
Takashi NAKAMURA / 1986 / Measurement of Form Errors by Phase Difference Method / Transactions of the Japan Society of Mechanical Engineers Series C 473(52):387~391
Wei GAO / 1995 / Roundness Measurement by the Orthogonal Mixed Method / Transactions of the Japan Society of Mechanical Engineers Series C 589(61):3775~3780
Korea Research Institute of Standards and Science / 1989 / Development of In-Process Gauging Technology (I), (II)
Yasuo AOKI / 1966 / On a New Method of Roundness Measurement Based on the Three-point / Shigeo OZONO Journal of the Japan Society of Precision Engineering 12(32):831~836
MethodMakoto OBI / 1988 / On a New Method of Roundness Measurement Based on the Sequential-Three-Points Method / Transactions of the Japan Society of Mechanical Engineers Series C 506(54):2475~2480
Wei GAO / 1995 / Roundness Measurement by the Orthogonal Mixed Method / Transactions of the Japan Society of Mechanical Engineers Series C 589(61):3775~3780
Korea Research Institute of Standards and Science / 1989 / Development of In-Process Gauging Technology (I), (II)
Yasuo AOKI / 1966 / On a New Method of Roundness Measurement Based on the Three-point / Shigeo OZONO Journal of the Japan Society of Precision Engineering 12(32):831~836
MethodMakoto OBI / 1988 / On a New Method of Roundness Measurement Based on the Sequential-Three-Points Method / Transactions of the Japan Society of Mechanical Engineers Series C 506(54):2475~2480
이 논문의 저자 정보
이 논문과 함께 이용한 논문
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-560-000480877