메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이유주 (충북대학교) 최태호 (충북대학교)
저널정보
한국펄프·종이공학회 펄프·종이기술 펄프·종이기술 제51권 제1호(통권 제186호)
발행연도
2019.2
수록면
107 - 113 (7page)
DOI
10.7584/JKTAPPI.2019.02.51.1.107

이용수

DBpia Top 10%동일한 주제분류 기준으로
최근 2년간 이용수 순으로 정렬했을 때
해당 논문이 위치하는 상위 비율을 의미합니다.
표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (5)

초록· 키워드

오류제보하기
The traditional sizing treatment for the Hanji is performed to give the following functions. Those are to stabilize the paint of the painting, to prevent the paint of painting and moisture from smearing into the painting itself, to prevent the paint of the painting and moisture from passing to the lining paper, and to make the colors of painting match the surrounding. In this study, the optimum mixing ratio of glue and alum was investigated by analyzing the sizing characteristics not only mixing ratios but also applying times. Pellet-form animal glue and alum were used for the Hanji sizing. The concentration of glue were 1.0%, 1.5%, and 2.0% (wt./wt.). The concentration of alum were 4%, 6%, 8%, and 10% (wt./wt.) based on each glue concentrations. The sizing solution was prepared by mixing each glue solution and alum solution. Sizing of the Hanji was performed by applying each sizing solution once and twice. Viscosity, pH, gloss, weight increase rate, contact angle, and color difference were measured for sizing characteristics of the Hanji.

목차

ABSTRACT
1. 서론
2. 재료 및 방법
3. 결과 및 고찰
4. 결론
Literature Cited

참고문헌 (12)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-586-000465081