메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김부안 (부경대학교) 문창권 (부경대학교) 최영민 (부경대학교) 김헌주 (부경대학교)
저널정보
한국동력기계공학회 동력시스템공학회지 한국동력기계공학회지 제23권 제2호
발행연도
2019.4
수록면
105 - 111 (7page)
DOI
10.9726/kspse.2019.23.2.105

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Mechanical properties of ring-type lead zirconate titanate (PZT) ceramics were investigated on the effect of sintering condition in this study. The ring-shaped green body of PZT was formed by using HP equipment and then put in the covered crucible. The PZT ceramics was sintered in the pressureless sintering furnace respectively with different heating rate (3℃/min, 5℃/min and 10℃/min). In conclusion, the compressive strength of ring-type PZT ceramics increased with lower heating rate and higher forming pressure. In particular it was greatly influenced by the type of crucible. Vicker’s hardness of PZT ceramics also improved with increasing forming pressure. From the fractography, the change of grain size according to the difference of heating rate and forming pressure has been shown relatively clearly.

목차

Abstract
1. 서론
2. 실험
3. 결과 및 고찰
4. 결론
References

참고문헌 (7)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-550-000716356