지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.6
- 수록면
- 335 - 341 (7page)
- DOI
- 10.4283/JMAG.2019.24.2.335
이용수
초록· 키워드
오류제보하기
Amorphous materials have the advantages of high permeability and low core losses. Their application in the motor can reduce the energy consumption and improve the efficiency. To investigate the advantage of amorphous materials on the performance of permanent magnet synchronous motors (PMSMs) at lower speed situation, three 1.5 kW motors used in steering pumps of electric vehicles are analyzed and compared. Two prototypes and the experimental platform are built. The experimental results indicate that the efficiency of the PMSM motor with amorphous materials increases by 1.4 % at 1200 rpm, which shows that amorphous materials can also improve the motor performance at lower speed. To further take advantage of amorphous materials, the particle swarm optimization algorithm is used to optimize the dimensions of amorphous motor and the efficiency is increased by 0.54 %.
목차
1. Introduction
2. Main Parameters of PMSMs
3. Performance Analysis and Comparison of Three Motors
4. Experiments and Discussion
5. Amorphous Motor Design Optimization
6. Conclusion
References
참고문헌 (9)
참고문헌 신청
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Effect of carbon addition on glass forming ability and soft magnetic properties of Fe76Si9-xB10P5Cx amorphous alloy
한국자기학회 학술연구발표회 논문개요집
2024 .05
-
Permanent magnet synchronous motor considering cryogenic motor design Research on Optimization Characteristics
한국자기학회 학술연구발표회 논문개요집
2022 .05
-
Soft magnetic properties of the amorphous core prepared by spark plasma sintering of amorphous Fe-based powder
한국자기학회 학술연구발표회 논문개요집
2024 .05
-
Permanent magnets for high efficiency motor
한국자기학회 학술연구발표회 논문개요집
2020 .11
-
Development of High Efficiency Line-Start Permanent Magnet Synchronous Motor from an Industrial Three Phase Induction Motor
한국자기학회 학술연구발표회 논문개요집
2017 .11
-
A Study on the Design Technology of Permanent Magnet Synchronous Motor Considering the Characteristics of Electric Vehicle and Recent Trend of Motor Technology
한국자기학회 학술연구발표회 논문개요집
2022 .11
-
Development Status of Permanent magnets for Vehicle Motor
한국자기학회 학술연구발표회 논문개요집
2021 .07
-
Interior Permanent Magnet Synchronous Motor for Electric Vehicle
한국자기학회 학술연구발표회 논문개요집
2015 .05
-
A Study on Blister Formation and Electrical Characteristics with Varied Annealing Condition of P-doped Amorphous Silicon
한국진공학회 학술발표회초록집
2016 .02
-
Effect of Ce/La addition on the soft magnetic properties in Fe-Si-B-P amorphous alloys
한국자기학회 학술연구발표회 논문개요집
2021 .07
-
Micromagnetic Studies on the Enhancement of the Coercivity of B-doped Sm(Fe0.8Co0.2)12 Thin Film by Forming Amorphous Grain Boundary
한국자기학회 학술연구발표회 논문개요집
2021 .07
-
Design of Fe-Based Amorphous Cores for Enhanced Soft Magnetic Performance
한국자기학회 학술연구발표회 논문개요집
2024 .11
-
Properties of soft and hard magnetic materials based on amorphous alloy system
한국자기학회 학술연구발표회 논문개요집
2020 .07
-
Hydroxide diffusion rates in amorphous solid water
한국진공학회 학술발표회초록집
2016 .02
-
Spoke-Type Permanent Magnet Synchronous Motor (PMSM) Performance: A Specific factor of Magnet
한국자기학회 학술연구발표회 논문개요집
2023 .05
-
Effect of layer deposition sequence for the cell characteristics of amorphous silicon thin film solar cells
한국진공학회 학술발표회초록집
2015 .02
-
Fabrication of high-Ms amorphous/nanocrystalline soft magnetic materials for high-frequency and high-efficiency electromagnetic applications
한국자기학회 학술연구발표회 논문개요집
2021 .11
-
Effect of Boron Additions on Glass Formation and Magnetic Properties of Fe-Co-Ti-Zr-B Amorphous Ribbons
Journal of Magnetics
2016 .06
-
Design and Verification of High Speed Permanent Magnet Synchronous Motor for Centrifugal Pumps Considering the Mechanical Stability
한국자기학회 학술연구발표회 논문개요집
2018 .11
-
Effect of Fe on the Magnetic Properties for Co-based Amorphous alloys
한국자기학회 학술연구발표회 논문개요집
2016 .05
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2019-428-000871999