인문학
사회과학
자연과학
공학
의약학
농수해양학
예술체육학
복합학
DBpia AI
AI 에이전트
AI 아이디어
AI 리더
AI 뷰어
Citeasy
크롬 서지관리 다운로드
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2019.6
- 수록면
- 243 - 253 (11page)
이용수
초록· 키워드
In the current research, friction stir vibration welding (FSVW) process was introduced for welding of Al5083 alloy as a new method to improve mechanical and microstructure characteristics of joining zone. Vibration through a motor was added regularly to weld line during the friction stir welding process. Finite element method (FEM) to verify experimental results in different vibration frequencies used. The results showed that grain size in the weld region reduces as vibration frequency increases. The increasing in straining results in the improvement of dislocation density, and leads to more development of high angle grain boundaries because of dynamic recrystallization. The grain size of base metal is 64 μm, while it is about 17 and 9 μm during FSW and FSVW respectively. Besides, strength, hardness and formability index of FSV welded samples were tremendous than that of FS welded ones. Ultimate tensile strength (UTS) increases from 180 MPa for FSW to 225 MPa as 48 Hz frequency vibration was used. The thrust force curve indicated that the time required to reach the highest thrust level as well as the peak thrust value reduce as the vibration frequency increases. This novel way can enhance the application of FSW, and it has suggested for utilization in various industries.
상세정보 수정요청해당 페이지 내 제목·저자·목차·페이지정보가 잘못된 경우 알려주세요!
목차
- Abstract
- 1. Introduction
- 2. Materials and Methods
- 3. Results and Discussion
- 4. Conclusion
- References
참고문헌
참고문헌 신청최근 본 자료
UCI(KEPA) : I410-ECN-0101-2019-581-000861680
