메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국부식방식학회 Corrosion Science and Technology Corrosion Science and Technology 제11권 제1호
발행연도
2012.1
수록면
9 - 14 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The formation of the Fe-Al inhibition layer in hot-dip galvanizing is a confusing issue for a long time. This study presents a characterization result on the inhibition layer formed on C-Mn-Cr and C-Mn-Si dual-phase steels after a short time galvanizing. The samples were annealed at 800 ℃ for 60 s in N2-10% H2 atmosphere with a dew point of -30 ℃, and were then galvanized in a bath containing 0.2 %Al. X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) was employed for characterization. The TEM electron diffraction shows that only Fe2Al5 intermetallic phase was formed. No orientation relationship between the Fe2Al5 phase and the steel substrate could be identified. Two peaks of Al 2p photoelectrons,one from metallic aluminum and the other from Al3+ ions, were detected in the inhibition layer, indicating that the layer is in fact a mixture of Fe2Al5 and Al2O3. TEM/EDS analysis verifies the existence of Al2O3in the boundaries of Fe2Al5 grains. The nucleation of Fe2Al5 and the reduction of the surface oxide probably proceeded concurrently on galvanizing, and the residual oxides prohibited the heteroepitaxial growth of Fe2Al5.

목차

등록된 정보가 없습니다.

참고문헌 (19)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0