메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국센서학회 센서학회지 센서학회지 제13권 제3호
발행연도
2004.1
수록면
230 - 235 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
This paper describes the design, fabrication and characteristics of a piezoelectric valve using MCA(Multilayer ceramicactuator). The MCA valve, which has the buckling effect, consists of three separate structures; MCA, a valve actuatordie and an a seat die. The design of the actuator die was done by FEM modeling and displacement measurement,respectively. The valve seat die with 6 trenches was made, and the actuator die, which is driven to MCA under optimizedconditions, was also fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was alsoanodic bonded to the seat/actuator die structure. PDMS sealing pad was fabricated to minimize a leak-rate. It was alsobonded to seat die and SUS package. The MCA valve shows a flow rate of 9.13 sccm at a supplied voltage of 100 Vwith a 50% duty cycle, maximum non-linearity was 2.24% FS and leak rate was 3.03 10-8 pa m3/cm2. Therefore, thefabricated MCA valve is suitable for a variety of flow control equipment, a medical bio-system, automobile and airtransportation industry.

목차

등록된 정보가 없습니다.

참고문헌 (11)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0