메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
한국전기전자재료학회 Transactions on Electrical and Electronic Materials Transactions on Electrical and Electronic Materials 제16권 제1호
발행연도
2015.1
수록면
37 - 41 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색

초록· 키워드

오류제보하기
The most common structure of the current transformer (CT) consists of a length of wire wrapped many times arounda silicon steel ring passed over the circuit being measured. Therefore, the primary circuit of CT consists of a singleturn of the conductor, with a secondary circuit of many tens or hundreds of turns. The primary winding may be apermanent part of the current transformer, with a heavy copper bar to carry the current through the magnetic core. However, when the large current flows into a wire, it is difficult to measure its magnitude of current because the core issaturated and the core shows magnetic nonlinear characteristics. Therefore, we proposed a newly designed CT whichhas an air gap in the core to decrease the generated magnetic flux. Adding the air gap in the magnetic path increasesthe total magnetic reluctance against the same magnetic motive force (MMF). Using a ferrite core instead of steelalso causes the generation of low magnetic flux. These features can protect the magnetic saturation of the CT corecompared with the steel core. This technique can help the design of the CT to obtain a special shape and size.

목차

등록된 정보가 없습니다.

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0