메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
이호철 (대구가톨릭대학교) 강명수 (에이텍모터) 김기대 (대구가톨릭대학교)
저널정보
Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Journal of the Korean Society for Precision Engineering Vol.36 No.11
발행연도
2019.11
수록면
1,033 - 1,038 (6page)
DOI
10.7736/KSPE.2019.36.11.1033

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
To identify the impeller types automatically for an overhead stirrer operation, a digitalization of the analog magnetic signal of the permanent magnet arrays was performed. The permanent magnets were installed into the impeller shaft in NS-SN array, and their magnetic fields were measured by a hall sensor while the impeller was mounted on the stirrer. Results of the experiments and finite element analysis showed that the number of peaks of magnetic field signal was observed corresponding to the number of magnets. Considering the consistency of the number and the magnitude of magnetic field peaks, it was found to be more advantageous to measure the magnetic field in the axial than in the radial direction of the impeller. For eliminating the influence of the noise included in the analog signal and connecting it with the micro-controller of the stirrer, the analog magnetic field signal was transformed to the digital-pulse-patterned signal through DC offset, amplification, absolute value, and the comparator circuit. Through these processes, the error in identifying the impeller type could be significantly reduced compared with directly using the magnitude of the analog magnetic signal.

목차

1. 서론
2. 선행연구 결과4
3. 연구내용 및 실험 방법
4. 실험 결과
5. 결론
REFERENCES

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2019-555-001319016