지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술대회자료
- 저자정보
- 발행연도
- 2018.8
- 수록면
- 11 - 15 (5page)
이용수
초록· 키워드
오류제보하기
Short fiber reinforced composites inherently have fiber length distribution (FLD) and fiber orientation distribution (FOD), which are important factors in determining thermo-mechanical properties of the composites. Since the internal structure has a significant effect on the thermomechanical properties of the composites, a non-destructive method is highly required to observe the three dimensional structure of fillers to acquire FLD and FOD in the composites. The internal structure of the composites is observed by using an X-ray microtomography and the FLD and FOD are fitted to various statistical functions to model the thermo-mechanical properties of the composites. The flowability of molten polymer composites is evaluated experimentally and numerically to evaluate the role of inclusions on rheological properties and processability of the composites. We also investigate the microstructural anisotropy of fiber reinforced polymer composites to understand the relationship between the local anisotropy and the mechanical strength of the composites. A shrinkage inhibition concept for the composites is proposed to explain the shrinkage behavior before and after an annealing process by using the Mori-Tanaka models. In addition, we visually represent the microstructural anisotropy of the polymer composites based on the Mori-Tanaka approach.
목차
Abstract
1. Introduction
2. Theoretical approach
3. Results and discussion
References
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Quadratic magnetoelectric effect of barium titanatecobalt ferrite (0-3) ceramic composite
Journal of Ceramic Processing Research
2020 .01
-
Self-healing fiber-reinforced composite
대한기계학회 춘추학술대회
2019 .04
-
Modulus Modeling of PP/GF Composites by X-ray Micro-CT and Comparison with Experimental Data
폴리머
2019 .05
-
사출 소재 주입 위치에 따른 단섬유 강화 복합소재 구조물의 면내/두께 방향 섬유배향 특성 분석
한국생산제조학회 학술발표대회 논문집
2022 .12
-
Fiber orientation characteristics in the injection/compression molding process of short fiber-reinforced composite materials
한국생산제조학회 학술발표대회 논문집
2022 .05
-
흡습 환경 하의 폴리프로필렌/유리 섬유 강화 복합재료의 환경 열화 특성
한국해양공학회지
2016 .12
-
Pseudo-strain hardening and mechanical properties of green cementitious composites containing polypropylene fibers
Structural Engineering and Mechanics, An Int＇l Journal
2022 .03
-
Absolute effective elastic constants of composite materials
Structural engineering and mechanics : An international journal
2016 .01
-
Improvement of bending properties by alkali surface treatment in flax fiber composites
대한기계학회 춘추학술대회
2021 .06
-
Study on heat generation characteristics of carbon fiber composite material
대한기계학회 춘추학술대회
2019 .05
-
유리섬유/대나무섬유/PP 복합재의 제조 조건에 따른 기계적 및 VOC 특성 비교 연구
한국염색가공학회지
2021 .09
-
Optimal design of Natural Fiber Composite Structure for Automobile
International Journal of Aerospace System Engineering
2016 .06
-
Evaluation of Strength Transition Rate for 6.8 L Composite Pressure Vessel Using Domestic High Strength Carbon Fiber
Journal of the Korean Society for Precision Engineering
2020 .11
-
연료전지 스택 인클로저의 복합소재 재료 구성에 따른 변형량 비교해석
한국생산제조학회 학술발표대회 논문집
2024 .07
-
Exploration of Li+-conducting Polymer Composites Using Data Science
한국고분자학회 학술대회 연구논문 초록집
2023 .04
-
Modelling Steel and Composite Structures(2017)
한국강구조학회지
2018 .02
-
An efficient and novel strategy for control of cracking, creep and shrinkage effects in steel-concrete composite beams
Structural Engineering and Mechanics, An Int＇l Journal
2019 .01
-
사출/압축 성형 공정 과정에서의 섬유배향 특성을 고려한 단섬유 강화 복합소재 성형-구조 연성 해석
한국생산제조학회 학술발표대회 논문집
2022 .07
-
Condition-based Structural Health Monitoring of Carbon Fiber Composites
한국고분자학회 학술대회 연구논문 초록집
2024 .09
-
석고-탄소섬유 복합재료 제조 및 특성평가
한국생산제조학회 학술발표대회 논문집
2016 .04
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2020-551-000122185