메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
박주현 (포항공과대학교) 권진규 (포항공과대학교) 김무환 (포항공과대학교) 차재은 (한국원자력연구원) 조항진 (포항공과대학교)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2019년 학술대회
발행연도
2019.11
수록면
152 - 157 (6page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
A printed circuit heat exchanger (PCHE) take an attention as a new type of heat exchanger for a high pressure system. The PCHE is fabricated by the photochemical etching and diffusion bonding process. The PCHE has micro-channels with complex geometries due to photochemical etching that provide high heat transfer performance and can operate at high pressure and high temperature due to diffusion bonding. In order to attain these advantages, PCHE was considered as a heat exchanger of supercritical CO₂ (sCO₂) Brayton cycle. The sCO₂ Brayton cycle is operated at high pressure and high temperature in order to operating at supercritical region. In this study, the heat transfers of a straight PCHE for a sCO₂ cooling with water were measured experimentally. To verify effect of properties near the critical point of CO₂, experiments with different operating condition was conducted. It can be explained about better heat transfer performance near the critical point.

목차

Abstract
1. 서론
2. 실험 장치 및 방법
3. 결과 및 분석
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0